Your IP : 216.73.216.86
compare.js 0000644 00000000234 15167732600 0006536 0 ustar 00 const SemVer = require('../classes/semver')
const compare = (a, b, loose) =>
new SemVer(a, loose).compare(new SemVer(b, loose))
module.exports = compare
inc.js 0000644 00000000720 15167732600 0005661 0 ustar 00 const SemVer = require('../classes/semver')
const inc = (version, release, options, identifier, identifierBase) => {
if (typeof (options) === 'string') {
identifierBase = identifier
identifier = options
options = undefined
}
try {
return new SemVer(
version instanceof SemVer ? version.version : version,
options
).inc(release, identifier, identifierBase).version
} catch (er) {
return null
}
}
module.exports = inc
compare-loose.js 0000644 00000000166 15167732600 0007661 0 ustar 00 const compare = require('./compare')
const compareLoose = (a, b) => compare(a, b, true)
module.exports = compareLoose
minor.js 0000644 00000000172 15167732600 0006235 0 ustar 00 const SemVer = require('../classes/semver')
const minor = (a, loose) => new SemVer(a, loose).minor
module.exports = minor
patch.js 0000644 00000000172 15167732600 0006210 0 ustar 00 const SemVer = require('../classes/semver')
const patch = (a, loose) => new SemVer(a, loose).patch
module.exports = patch
compare-build.js 0000644 00000000413 15167732600 0007632 0 ustar 00 const SemVer = require('../classes/semver')
const compareBuild = (a, b, loose) => {
const versionA = new SemVer(a, loose)
const versionB = new SemVer(b, loose)
return versionA.compare(versionB) || versionA.compareBuild(versionB)
}
module.exports = compareBuild
prerelease.js 0000644 00000000334 15167732600 0007240 0 ustar 00 const parse = require('./parse')
const prerelease = (version, options) => {
const parsed = parse(version, options)
return (parsed && parsed.prerelease.length) ? parsed.prerelease : null
}
module.exports = prerelease
cmp.js 0000644 00000001663 15167732600 0005676 0 ustar 00 const eq = require('./eq')
const neq = require('./neq')
const gt = require('./gt')
const gte = require('./gte')
const lt = require('./lt')
const lte = require('./lte')
const cmp = (a, op, b, loose) => {
switch (op) {
case '===':
if (typeof a === 'object') {
a = a.version
}
if (typeof b === 'object') {
b = b.version
}
return a === b
case '!==':
if (typeof a === 'object') {
a = a.version
}
if (typeof b === 'object') {
b = b.version
}
return a !== b
case '':
case '=':
case '==':
return eq(a, b, loose)
case '!=':
return neq(a, b, loose)
case '>':
return gt(a, b, loose)
case '>=':
return gte(a, b, loose)
case '<':
return lt(a, b, loose)
case '<=':
return lte(a, b, loose)
default:
throw new TypeError(`Invalid operator: ${op}`)
}
}
module.exports = cmp
neq.js 0000644 00000000162 15167732600 0005673 0 ustar 00 const compare = require('./compare')
const neq = (a, b, loose) => compare(a, b, loose) !== 0
module.exports = neq
gt.js 0000644 00000000156 15167732600 0005525 0 ustar 00 const compare = require('./compare')
const gt = (a, b, loose) => compare(a, b, loose) > 0
module.exports = gt
parse.js 0000644 00000000475 15167732600 0006231 0 ustar 00 const SemVer = require('../classes/semver')
const parse = (version, options, throwErrors = false) => {
if (version instanceof SemVer) {
return version
}
try {
return new SemVer(version, options)
} catch (er) {
if (!throwErrors) {
return null
}
throw er
}
}
module.exports = parse
sort.js 0000644 00000000223 15167732600 0006075 0 ustar 00 const compareBuild = require('./compare-build')
const sort = (list, loose) => list.sort((a, b) => compareBuild(a, b, loose))
module.exports = sort
rcompare.js 0000644 00000000166 15167732600 0006724 0 ustar 00 const compare = require('./compare')
const rcompare = (a, b, loose) => compare(b, a, loose)
module.exports = rcompare
lte.js 0000644 00000000161 15167732600 0005673 0 ustar 00 const compare = require('./compare')
const lte = (a, b, loose) => compare(a, b, loose) <= 0
module.exports = lte
coerce.js 0000644 00000003706 15167732600 0006357 0 ustar 00 const SemVer = require('../classes/semver')
const parse = require('./parse')
const { safeRe: re, t } = require('../internal/re')
const coerce = (version, options) => {
if (version instanceof SemVer) {
return version
}
if (typeof version === 'number') {
version = String(version)
}
if (typeof version !== 'string') {
return null
}
options = options || {}
let match = null
if (!options.rtl) {
match = version.match(options.includePrerelease ? re[t.COERCEFULL] : re[t.COERCE])
} else {
// Find the right-most coercible string that does not share
// a terminus with a more left-ward coercible string.
// Eg, '1.2.3.4' wants to coerce '2.3.4', not '3.4' or '4'
// With includePrerelease option set, '1.2.3.4-rc' wants to coerce '2.3.4-rc', not '2.3.4'
//
// Walk through the string checking with a /g regexp
// Manually set the index so as to pick up overlapping matches.
// Stop when we get a match that ends at the string end, since no
// coercible string can be more right-ward without the same terminus.
const coerceRtlRegex = options.includePrerelease ? re[t.COERCERTLFULL] : re[t.COERCERTL]
let next
while ((next = coerceRtlRegex.exec(version)) &&
(!match || match.index + match[0].length !== version.length)
) {
if (!match ||
next.index + next[0].length !== match.index + match[0].length) {
match = next
}
coerceRtlRegex.lastIndex = next.index + next[1].length + next[2].length
}
// leave it in a clean state
coerceRtlRegex.lastIndex = -1
}
if (match === null) {
return null
}
const major = match[2]
const minor = match[3] || '0'
const patch = match[4] || '0'
const prerelease = options.includePrerelease && match[5] ? `-${match[5]}` : ''
const build = options.includePrerelease && match[6] ? `+${match[6]}` : ''
return parse(`${major}.${minor}.${patch}${prerelease}${build}`, options)
}
module.exports = coerce
major.js 0000644 00000000172 15167732600 0006221 0 ustar 00 const SemVer = require('../classes/semver')
const major = (a, loose) => new SemVer(a, loose).major
module.exports = major
eq.js 0000644 00000000160 15167732600 0005513 0 ustar 00 const compare = require('./compare')
const eq = (a, b, loose) => compare(a, b, loose) === 0
module.exports = eq
gte.js 0000644 00000000161 15167732600 0005666 0 ustar 00 const compare = require('./compare')
const gte = (a, b, loose) => compare(a, b, loose) >= 0
module.exports = gte
valid.js 0000644 00000000242 15167732600 0006206 0 ustar 00 const parse = require('./parse')
const valid = (version, options) => {
const v = parse(version, options)
return v ? v.version : null
}
module.exports = valid
satisfies.js 0000644 00000000351 15167732600 0007102 0 ustar 00 const Range = require('../classes/range')
const satisfies = (version, range, options) => {
try {
range = new Range(range, options)
} catch (er) {
return false
}
return range.test(version)
}
module.exports = satisfies
clean.js 0000644 00000000277 15167732600 0006201 0 ustar 00 const parse = require('./parse')
const clean = (version, options) => {
const s = parse(version.trim().replace(/^[=v]+/, ''), options)
return s ? s.version : null
}
module.exports = clean
rsort.js 0000644 00000000225 15167732600 0006261 0 ustar 00 const compareBuild = require('./compare-build')
const rsort = (list, loose) => list.sort((a, b) => compareBuild(b, a, loose))
module.exports = rsort
lt.js 0000644 00000000156 15167732600 0005532 0 ustar 00 const compare = require('./compare')
const lt = (a, b, loose) => compare(a, b, loose) < 0
module.exports = lt
diff.js 0000644 00000003114 15167732600 0006020 0 ustar 00 const parse = require('./parse.js')
const diff = (version1, version2) => {
const v1 = parse(version1, null, true)
const v2 = parse(version2, null, true)
const comparison = v1.compare(v2)
if (comparison === 0) {
return null
}
const v1Higher = comparison > 0
const highVersion = v1Higher ? v1 : v2
const lowVersion = v1Higher ? v2 : v1
const highHasPre = !!highVersion.prerelease.length
const lowHasPre = !!lowVersion.prerelease.length
if (lowHasPre && !highHasPre) {
// Going from prerelease -> no prerelease requires some special casing
// If the low version has only a major, then it will always be a major
// Some examples:
// 1.0.0-1 -> 1.0.0
// 1.0.0-1 -> 1.1.1
// 1.0.0-1 -> 2.0.0
if (!lowVersion.patch && !lowVersion.minor) {
return 'major'
}
// Otherwise it can be determined by checking the high version
if (highVersion.patch) {
// anything higher than a patch bump would result in the wrong version
return 'patch'
}
if (highVersion.minor) {
// anything higher than a minor bump would result in the wrong version
return 'minor'
}
// bumping major/minor/patch all have same result
return 'major'
}
// add the `pre` prefix if we are going to a prerelease version
const prefix = highHasPre ? 'pre' : ''
if (v1.major !== v2.major) {
return prefix + 'major'
}
if (v1.minor !== v2.minor) {
return prefix + 'minor'
}
if (v1.patch !== v2.patch) {
return prefix + 'patch'
}
// high and low are preleases
return 'prerelease'
}
module.exports = diff
usr/lib/tuned/functions 0000644 00000036164 15170643164 0011216 0 ustar 00 #
# This is library of helper functions that can be used in scripts in tuned profiles.
#
# API provided by this library is under heavy development and could be changed anytime
#
#
# Config
#
STORAGE=/run/tuned
STORAGE_PERSISTENT=/var/lib/tuned
STORAGE_SUFFIX=".save"
#
# Helpers
#
# Save value
# $0 STORAGE_NAME VALUE
save_value() {
[ "$#" -ne 2 ] && return
[ "$2" -a -e "${STORAGE}" ] && echo "$2" > "${STORAGE}/${1}${STORAGE_SUFFIX}"
}
# Parse sysfs value, i.e. for "val1 [val2] val3" return "val2"
# $0 SYSFS_NAME
parse_sys() {
local V1 V2
[ -r "$1" ] || return
V1=`cat "$1"`
V2="${V1##*[}"
V2="${V2%%]*}"
echo "${V2:-$V1}"
}
# Save sysfs value
# $0 STORAGE_NAME SYSFS_NAME
save_sys() {
[ "$#" -ne 2 ] && return
[ -r "$2" -a ! -e "${STORAGE}/${1}${STORAGE_SUFFIX}" ] && parse_sys "$2" > "${STORAGE}/${1}${STORAGE_SUFFIX}"
}
# Set sysfs value
# $0 SYSFS_NAME VALUE
set_sys() {
[ "$#" -ne 2 ] && return
[ -w "$1" ] && echo "$2" > "$1"
}
# Save and set sysfs value
# $0 STORAGE_NAME SYSFS_NAME VALUE
save_set_sys() {
[ "$#" -ne 3 ] && return
save_sys "$1" "$2"
set_sys "$2" "$3"
}
# Get stored sysfs value from storage
# $0 STORAGE_NAME
get_stored_sys() {
[ "$#" -ne 1 ] && return
[ -r "${STORAGE}/${1}${STORAGE_SUFFIX}" ] && cat "${STORAGE}/${1}${STORAGE_SUFFIX}"
}
# Restore value from storage
# $0 STORAGE_NAME
restore_value() {
[ "$#" -ne 1 ] && return
_rs_value="`get_stored_sys \"$1\"`"
unlink "${STORAGE}/${1}${STORAGE_SUFFIX}" >/dev/null 2>&1
[ "$_rs_value" ] && echo "$_rs_value"
}
# Restore sysfs value from storage, if nothing is stored, use VALUE
# $0 STORAGE_NAME SYSFS_NAME [VALUE]
restore_sys() {
[ "$#" -lt 2 -o "$#" -gt 3 ] && return
_rs_value="`get_stored_sys \"$1\"`"
unlink "${STORAGE}/${1}${STORAGE_SUFFIX}" >/dev/null 2>&1
[ "$_rs_value" ] || _rs_value="$3"
[ "$_rs_value" ] && set_sys "$2" "$_rs_value"
}
#
# DISK tuning
#
DISKS_DEV="$(command ls -d1 /dev/[shv]d*[a-z] 2>/dev/null)"
DISKS_SYS="$(command ls -d1 /sys/block/{sd,cciss,dm-,vd,dasd,xvd}* 2>/dev/null)"
_check_elevator_override()
{
/bin/fgrep -q 'elevator=' /proc/cmdline
}
# $0 OPERATOR DEVICES ELEVATOR
_set_elevator_helper() {
_check_elevator_override && return
SYS_BLOCK_SDX=""
[ "$2" ] && SYS_BLOCK_SDX=$(eval LANG=C /bin/ls -1 "${2}" 2>/dev/null)
# if there is no kernel command line elevator settings, apply the elevator
if [ "$1" -a "$SYS_BLOCK_SDX" ]; then
for i in $SYS_BLOCK_SDX; do
se_dev="`echo \"$i\" | sed 's|/sys/block/\([^/]\+\)/queue/scheduler|\1|'`"
$1 "elevator_${se_dev}" "$i" "$3"
done
fi
}
# $0 DEVICES ELEVATOR
set_elevator() {
_set_elevator_helper save_set_sys "$1" "$2"
}
# $0 DEVICES [ELEVATOR]
restore_elevator() {
re_elevator="$2"
[ "$re_elevator" ] || re_elevator=cfq
_set_elevator_helper restore_sys "$1" "$re_elevator"
}
# SATA Aggressive Link Power Management
# usage: set_disk_alpm policy
set_disk_alpm() {
policy=$1
for host in /sys/class/scsi_host/*; do
if [ -f $host/ahci_port_cmd ]; then
port_cmd=`cat $host/ahci_port_cmd`;
if [ $((0x$port_cmd & 0x240000)) = 0 -a -f $host/link_power_management_policy ]; then
echo $policy >$host/link_power_management_policy;
else
echo "max_performance" >$host/link_power_management_policy;
fi
fi
done
}
# usage: set_disk_apm level
set_disk_apm() {
level=$1
for disk in $DISKS_DEV; do
hdparm -B $level $disk &>/dev/null
done
}
# usage: set_disk_spindown level
set_disk_spindown() {
level=$1
for disk in $DISKS_DEV; do
hdparm -S $level $disk &>/dev/null
done
}
# usage: multiply_disk_readahead by
multiply_disk_readahead() {
by=$1
# float multiplication not supported in bash
# bc might not be installed, python is available for sure
for disk in $DISKS_SYS; do
control="${disk}/queue/read_ahead_kb"
old=$(cat $control)
new=$(echo "print int($old*$by)" | python)
(echo $new > $control) &>/dev/null
done
}
# usage: remount_disk options partition1 partition2 ...
remount_partitions() {
options=$1
shift
for partition in $@; do
mount -o remount,$options $partition >/dev/null 2>&1
done
}
remount_all_no_rootboot_partitions() {
[ "$1" ] || return
# Find non-root and non-boot partitions, disable barriers on them
rootvol=$(df -h / | grep "^/dev" | awk '{print $1}')
bootvol=$(df -h /boot | grep "^/dev" | awk '{print $1}')
volumes=$(df -hl --exclude=tmpfs | grep "^/dev" | awk '{print $1}')
nobarriervols=$(echo "$volumes" | grep -v $rootvol | grep -v $bootvol)
remount_partitions "$1" $nobarriervols
}
DISK_QUANTUM_SAVE="${STORAGE}/disk_quantum${STORAGE_SUFFIX}"
set_disk_scheduler_quantum() {
value=$1
rm -f "$DISK_QUANTUM_SAVE"
for disk in $DISKS_SYS; do
control="${disk}/queue/iosched/quantum"
echo "echo $(cat $control) > $control" >> "$DISK_QUANTUM_SAVE" 2>/dev/null
(echo $value > $control) &2>/dev/null
done
}
restore_disk_scheduler_quantum() {
if [ -r "$DISK_QUANTUM_SAVE" ]; then
/bin/bash "$DISK_QUANTUM_SAVE" &>/dev/null
rm -f "$DISK_QUANTUM_SAVE"
fi
}
#
# CPU tuning
#
CPUSPEED_SAVE_FILE="${STORAGE}/cpuspeed${STORAGE_SUFFIX}"
CPUSPEED_ORIG_GOV="${STORAGE}/cpuspeed-governor-%s${STORAGE_SUFFIX}"
CPUSPEED_STARTED="${STORAGE}/cpuspeed-started"
CPUSPEED_CFG="/etc/sysconfig/cpuspeed"
CPUSPEED_INIT="/etc/rc.d/init.d/cpuspeed"
# do not use cpuspeed
CPUSPEED_USE="0"
CPUS="$(ls -d1 /sys/devices/system/cpu/cpu* | sed 's;^.*/;;' | grep "cpu[0-9]\+")"
# set CPU governor setting and store the old settings
# usage: set_cpu_governor governor
set_cpu_governor() {
governor=$1
# always patch cpuspeed configuration if exists, if it doesn't exist and is enabled,
# explicitly disable it with hint
if [ -e $CPUSPEED_INIT ]; then
if [ ! -e $CPUSPEED_SAVE_FILE -a -e $CPUSPEED_CFG ]; then
cp -p $CPUSPEED_CFG $CPUSPEED_SAVE_FILE
sed -e 's/^GOVERNOR=.*/GOVERNOR='$governor'/g' $CPUSPEED_SAVE_FILE > $CPUSPEED_CFG
fi
else
if [ "$CPUSPEED_USE" = "1" ]; then
echo >&2
echo "Suggestion: install 'cpuspeed' package to get best tuning results." >&2
echo "Falling back to sysfs control." >&2
echo >&2
fi
CPUSPEED_USE="0"
fi
if [ "$CPUSPEED_USE" = "1" ]; then
service cpuspeed status &> /dev/null
[ $? -eq 3 ] && touch $CPUSPEED_STARTED || rm -f $CPUSPEED_STARTED
service cpuspeed restart &> /dev/null
# direct change using sysfs
elif [ -e /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then
for cpu in $CPUS; do
gov_file=/sys/devices/system/cpu/$cpu/cpufreq/scaling_governor
save_file=$(printf $CPUSPEED_ORIG_GOV $cpu)
rm -f $save_file
if [ -e $gov_file ]; then
cat $gov_file > $save_file
echo $governor > $gov_file
fi
done
fi
}
# re-enable previous CPU governor settings
# usage: restore_cpu_governor
restore_cpu_governor() {
if [ -e $CPUSPEED_INIT ]; then
if [ -e $CPUSPEED_SAVE_FILE ]; then
cp -fp $CPUSPEED_SAVE_FILE $CPUSPEED_CFG
rm -f $CPUSPEED_SAVE_FILE
fi
if [ "$CPUSPEED_USE" = "1" ]; then
if [ -e $CPUSPEED_STARTED ]; then
service cpuspeed stop &> /dev/null
else
service cpuspeed restart &> /dev/null
fi
fi
if [ -e $CPUSPEED_STARTED ]; then
rm -f $CPUSPEED_STARTED
fi
else
CPUSPEED_USE="0"
fi
if [ "$CPUSPEED_USE" != "1" -a -e /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then
for cpu in $CPUS; do
cpufreq_dir=/sys/devices/system/cpu/$cpu/cpufreq
save_file=$(printf $CPUSPEED_ORIG_GOV $cpu)
if [ -e $cpufreq_dir/scaling_governor ]; then
if [ -e $save_file ]; then
cat $save_file > $cpufreq_dir/scaling_governor
rm -f $save_file
else
echo userspace > $cpufreq_dir/scaling_governor
cat $cpufreq_dir/cpuinfo_max_freq > $cpufreq_dir/scaling_setspeed
fi
fi
done
fi
}
_cpu_multicore_powersave() {
value=$1
[ -e /sys/devices/system/cpu/sched_mc_power_savings ] && echo $value > /sys/devices/system/cpu/sched_mc_power_savings
}
# enable multi core power savings for low wakeup systems
enable_cpu_multicore_powersave() {
_cpu_multicore_powersave 1
}
disable_cpu_multicore_powersave() {
_cpu_multicore_powersave 0
}
#
# MEMORY tuning
#
THP_ENABLE="/sys/kernel/mm/transparent_hugepage/enabled"
THP_SAVE="${STORAGE}/thp${STORAGE_SUFFIX}"
[ -e "$THP_ENABLE" ] || THP_ENABLE="/sys/kernel/mm/redhat_transparent_hugepage/enabled"
enable_transparent_hugepages() {
if [ -e $THP_ENABLE ]; then
cut -f2 -d'[' $THP_ENABLE | cut -f1 -d']' > $THP_SAVE
(echo always > $THP_ENABLE) &> /dev/null
fi
}
restore_transparent_hugepages() {
if [ -e $THP_SAVE ]; then
(echo $(cat $THP_SAVE) > $THP_ENABLE) &> /dev/null
rm -f $THP_SAVE
fi
}
#
# WIFI tuning
#
# usage: _wifi_set_power_level level
_wifi_set_power_level() {
# 0 auto, PM enabled
# 1-5 least savings and lowest latency - most savings and highest latency
# 6 disable power savings
level=$1
# do not report errors on systems with no wireless
[ -e /proc/net/wireless ] || return 0
# apply the settings using iwpriv
ifaces=$(cat /proc/net/wireless | grep -v '|' | sed 's@^ *\([^:]*\):.*@\1@')
for iface in $ifaces; do
iwpriv $iface set_power $level
done
# some adapters may rely on sysfs
for i in /sys/bus/pci/devices/*/power_level; do
(echo $level > $i) &> /dev/null
done
}
enable_wifi_powersave() {
_wifi_set_power_level 5
}
disable_wifi_powersave() {
_wifi_set_power_level 0
}
#
# BLUETOOTH tuning
#
disable_bluetooth() {
hciconfig hci0 down >/dev/null 2>&1
lsmod | grep -q btusb && rmmod btusb
}
enable_bluetooth() {
modprobe btusb
hciconfig hci0 up >/dev/null 2>&1
}
#
# USB tuning
#
_usb_autosuspend() {
value=$1
for i in /sys/bus/usb/devices/*/power/autosuspend; do echo $value > $i; done &> /dev/null
}
enable_usb_autosuspend() {
_usb_autosuspend 1
}
disable_usb_autosuspend() {
_usb_autosuspend 0
}
#
# SOUND CARDS tuning
#
enable_snd_ac97_powersave() {
save_set_sys ac97 /sys/module/snd_ac97_codec/parameters/power_save Y
}
disable_snd_ac97_powersave() {
save_set_sys ac97 /sys/module/snd_ac97_codec/parameters/power_save N
}
restore_snd_ac97_powersave() {
restore_sys ac97 /sys/module/snd_ac97_codec/parameters/power_save $1
}
set_hda_intel_powersave() {
save_set_sys hda_intel /sys/module/snd_hda_intel/parameters/power_save $1
}
restore_hda_intel_powersave() {
restore_sys hda_intel /sys/module/snd_hda_intel/parameters/power_save $1
}
#
# VIDEO CARDS tuning
#
# Power savings settings for Radeon
# usage: set_radeon_powersave dynpm | default | low | mid | high
set_radeon_powersave () {
[ "$1" ] || return
[ -e /sys/class/drm/card0/device/power_method ] || return
if [ "$1" = default -o "$1" = auto -o "$1" = low -o "$1" = med -o "$1" = high ]; then
[ -w /sys/class/drm/card0/device/power_profile ] || return
save_sys radeon_profile /sys/class/drm/card0/device/power_profile
save_set_sys radeon_method /sys/class/drm/card0/device/power_method profile
set_sys /sys/class/drm/card0/device/power_profile "$1"
elif [ "$1" = dynpm ]; then
save_sys radeon_profile /sys/class/drm/card0/device/power_profile
save_set_sys radeon_method /sys/class/drm/card0/device/power_method dynpm
fi
}
restore_radeon_powersave () {
restore_sys radeon_method /sys/class/drm/card0/device/power_method profile
_rrp_method="`get_stored_sys radeon_method`"
[ -z "$_rrp_method" -o _rrp_method="profile" ] && restore_sys radeon_profile /sys/class/drm/card0/device/power_profile default
}
#
# SOFTWARE tuning
#
RSYSLOG_CFG="/etc/rsyslog.conf"
RSYSLOG_SAVE="${STORAGE}/cpuspeed${STORAGE_SUFFIX}"
disable_logs_syncing() {
cp -p $RSYSLOG_CFG $RSYSLOG_SAVE
sed -i 's/ \/var\/log/-\/var\/log/' $RSYSLOG_CFG
}
restore_logs_syncing() {
mv -Z $RSYSLOG_SAVE $RSYSLOG_CFG || mv $RSYSLOG_SAVE $RSYSLOG_CFG
}
irqbalance_banned_cpus_clear() {
sed -i '/^IRQBALANCE_BANNED_CPUS=/d' /etc/sysconfig/irqbalance || return
if [ ${1:-restart} = restart ]; then
systemctl try-restart irqbalance
fi
}
irqbalance_banned_cpus_setup() {
irqbalance_banned_cpus_clear norestart
if [ -n "$1" ]; then
echo "IRQBALANCE_BANNED_CPUS=$1" >> /etc/sysconfig/irqbalance
fi
systemctl try-restart irqbalance
}
#
# HARDWARE SPECIFIC tuning
#
# Asus EEE with Intel Atom
_eee_fsb_control() {
value=$1
if [ -e /sys/devices/platform/eeepc/she ]; then
echo $value > /sys/devices/platform/eeepc/she
elif [ -e /sys/devices/platform/eeepc/cpufv ]; then
echo $value > /sys/devices/platform/eeepc/cpufv
elif [ -e /sys/devices/platform/eeepc-wmi/cpufv ]; then
echo $value > /sys/devices/platform/eeepc-wmi/cpufv
fi
}
eee_set_reduced_fsb() {
_eee_fsb_control 2
}
eee_set_normal_fsb() {
_eee_fsb_control 1
}
#
# modprobe configuration handling
#
kvm_modprobe_file=/etc/modprobe.d/kvm.rt.tuned.conf
teardown_kvm_mod_low_latency()
{
rm -f $kvm_modprobe_file
}
setup_kvm_mod_low_latency()
{
local HAS_KPS=""
local HAS_NX_HP=""
local HAS_PLE_GAP=""
local WANTS_KPS=""
local WANTS_NX_HP=""
local WANTS_PLE_GAP=""
modinfo -p kvm | grep -q kvmclock_periodic_sync && HAS_KPS=1
modinfo -p kvm | grep -q nx_huge_pages && HAS_NX_HP=1
modinfo -p kvm_intel | grep -q ple_gap && HAS_PLE_GAP=1
grep -qs kvmclock_periodic_sync "$kvm_modprobe_file" && WANTS_KPS=1
grep -qs nx_huge_pages "$kvm_modprobe_file" && WANTS_NX_HP=1
grep -qs ple_gap "$kvm_modprobe_file" && WANTS_PLE_GAP=1
if [ "$HAS_KPS" != "$WANTS_KPS" -o "$HAS_PLE_GAP" != "$WANTS_PLE_GAP" -o \
"$HAS_NX_HP" != "$WANTS_NX_HP" ]; then
teardown_kvm_mod_low_latency
[ "$HAS_KPS" ] && echo "options kvm kvmclock_periodic_sync=0" > $kvm_modprobe_file
[ "$HAS_NX_HP" ] && echo "options kvm nx_huge_pages=0" >> $kvm_modprobe_file
[ "$HAS_PLE_GAP" ] && echo "options kvm_intel ple_gap=0" >> $kvm_modprobe_file
fi
return 0
}
#
# KSM
#
KSM_SERVICES="ksm ksmtuned"
KSM_RUN_PATH=/sys/kernel/mm/ksm/run
KSM_MASK_FILE="${STORAGE_PERSISTENT}/ksm-masked"
disable_ksm()
{
if [ ! -f $KSM_MASK_FILE ]; then
# Always create $KSM_MASK_FILE, since we don't want to
# run any systemctl commands during boot
if ! touch $KSM_MASK_FILE; then
die "failed to create $KSM_MASK_FILE"
fi
# Do not run any systemctl commands if $KSM_SERVICES units do not exist
systemctl cat -- $KSM_SERVICES &> /dev/null || return 0
systemctl --now --quiet mask $KSM_SERVICES
# Unmerge all shared pages
test -f $KSM_RUN_PATH && echo 2 > $KSM_RUN_PATH
fi
}
# Should only be called when full_rollback == true
enable_ksm()
{
if [ -f $KSM_MASK_FILE ]; then
# Do not run any systemctl commands if $KSM_SERVICES units do not exist
systemctl cat -- $KSM_SERVICES &> /dev/null || return 0
if systemctl --quiet unmask $KSM_SERVICES; then
rm -f $KSM_MASK_FILE
fi
fi
}
die() {
echo "$@" >&2
exit 1
}
#
# ACTION PROCESSING
#
error_not_implemented() {
echo "tuned: script function '$1' is not implemented." >&2
}
# implicit actions, will be used if not provided by profile script:
#
# * start must be implemented
# * stop must be implemented
start() {
error_not_implemented start
return 16
}
stop() {
error_not_implemented stop
return 16
}
#
# main processing
#
process() {
ARG="$1"
shift
case "$ARG" in
start)
start "$@"
RETVAL=$?
;;
stop)
stop "$@"
RETVAL=$?
;;
verify)
if declare -f verify &> /dev/null;
then
verify "$@"
else
:
fi
RETVAL=$?
;;
*)
echo $"Usage: $0 {start|stop|verify}"
RETVAL=2
;;
esac
exit $RETVAL
}
etc/rc.d/init.d/functions 0000644 00000044002 15170754262 0011276 0 ustar 00 # -*-Shell-script-*-
#
# functions This file contains functions to be used by most or all
# shell scripts in the /etc/init.d directory.
#
TEXTDOMAIN=initscripts
# Make sure umask is sane
umask 022
# Set up a default search path.
PATH="/sbin:/usr/sbin:/bin:/usr/bin"
export PATH
if [ $PPID -ne 1 -a -z "$SYSTEMCTL_SKIP_REDIRECT" ] && \
[ -d /run/systemd/system ] ; then
case "$0" in
/etc/init.d/*|/etc/rc.d/init.d/*)
_use_systemctl=1
;;
esac
fi
systemctl_redirect () {
local s
local prog=${1##*/}
local command=$2
local options=""
case "$command" in
start)
s=$"Starting $prog (via systemctl): "
;;
stop)
s=$"Stopping $prog (via systemctl): "
;;
reload|try-reload)
s=$"Reloading $prog configuration (via systemctl): "
;;
restart|try-restart|condrestart)
s=$"Restarting $prog (via systemctl): "
;;
esac
if [ -n "$SYSTEMCTL_IGNORE_DEPENDENCIES" ] ; then
options="--ignore-dependencies"
fi
if ! systemctl show "$prog.service" > /dev/null 2>&1 || \
systemctl show -p LoadState "$prog.service" | grep -q 'not-found' ; then
action $"Reloading systemd: " /bin/systemctl daemon-reload
fi
action "$s" /bin/systemctl $options $command "$prog.service"
}
# Get a sane screen width
[ -z "${COLUMNS:-}" ] && COLUMNS=80
# Read in our configuration
if [ -z "${BOOTUP:-}" ]; then
if [ -f /etc/sysconfig/init ]; then
. /etc/sysconfig/init
else
# verbose ->> very (very!) old bootup look (prior to RHL-6.0?)
# color ->> default bootup look
# other ->> default bootup look without ANSI colors or positioning
BOOTUP=color
# Column to start "[ OK ]" label in:
RES_COL=60
# terminal sequence to move to that column:
MOVE_TO_COL="echo -en \\033[${RES_COL}G"
# Terminal sequence to set color to a 'success' (bright green):
SETCOLOR_SUCCESS="echo -en \\033[1;32m"
# Terminal sequence to set color to a 'failure' (bright red):
SETCOLOR_FAILURE="echo -en \\033[1;31m"
# Terminal sequence to set color to a 'warning' (bright yellow):
SETCOLOR_WARNING="echo -en \\033[1;33m"
# Terminal sequence to reset to the default color:
SETCOLOR_NORMAL="echo -en \\033[0;39m"
# Verbosity of logging:
LOGLEVEL=1
fi
# NOTE: /dev/ttyS* is serial console. "not a tty" is such as
# /dev/null associated when executed under systemd service units.
if LANG=C tty | grep --quiet -e '\(/dev/ttyS\|not a tty\)'; then
BOOTUP=serial
MOVE_TO_COL=
SETCOLOR_SUCCESS=
SETCOLOR_FAILURE=
SETCOLOR_WARNING=
SETCOLOR_NORMAL=
fi
fi
# Check if any of $pid (could be plural) are running
checkpid() {
local i
for i in $* ; do
[ -d "/proc/$i" ] && return 0
done
return 1
}
__kill_pids_term_kill_checkpids() {
local base_stime=$1
shift 1
local pid=
local pids=$*
local remaining=
local stat=
local stime=
for pid in $pids ; do
[ ! -e "/proc/$pid" ] && continue
read -r line < "/proc/$pid/stat" 2> /dev/null
stat=($line)
stime=${stat[21]}
[ -n "$stime" ] && [ "$base_stime" -lt "$stime" ] && continue
remaining+="$pid "
done
echo "$remaining"
[ -n "$remaining" ] && return 1
return 0
}
__kill_pids_term_kill() {
local try=0
local delay=3;
local pid=
local stat=
local base_stime=
# We can't initialize stat & base_stime on the same line where 'local'
# keyword is, otherwise the sourcing of this file will fail for ksh...
stat=($(< /proc/self/stat))
base_stime=${stat[21]}
if [ "$1" = "-d" ]; then
delay=$2
shift 2
fi
local kill_list=$*
kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)
[ -z "$kill_list" ] && return 0
kill -TERM $kill_list >/dev/null 2>&1
sleep 0.1
kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)
if [ -n "$kill_list" ] ; then
while [ $try -lt $delay ] ; do
sleep 1
kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)
[ -z "$kill_list" ] && break
let try+=1
done
if [ -n "$kill_list" ] ; then
kill -KILL $kill_list >/dev/null 2>&1
sleep 0.1
kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list)
fi
fi
[ -n "$kill_list" ] && return 1
return 0
}
# __proc_pids {program} [pidfile]
# Set $pid to pids from /run* for {program}. $pid should be declared
# local in the caller.
# Returns LSB exit code for the 'status' action.
__pids_var_run() {
local base=${1##*/}
local pid_file=${2:-/run/$base.pid}
local pid_dir=$(/usr/bin/dirname $pid_file > /dev/null)
local binary=$3
[ -d "$pid_dir" ] && [ ! -r "$pid_dir" ] && return 4
pid=
if [ -f "$pid_file" ] ; then
local line p
[ ! -r "$pid_file" ] && return 4 # "user had insufficient privilege"
while : ; do
read line
[ -z "$line" ] && break
for p in $line ; do
if [ -z "${p//[0-9]/}" ] && [ -d "/proc/$p" ] ; then
if [ -n "$binary" ] ; then
local b=$(readlink /proc/$p/exe | sed -e 's/\s*(deleted)$//')
[ "$b" != "$binary" ] && continue
fi
pid="$pid $p"
fi
done
done < "$pid_file"
if [ -n "$pid" ]; then
return 0
fi
return 1 # "Program is dead and /run pid file exists"
fi
return 3 # "Program is not running"
}
# Output PIDs of matching processes, found using pidof
__pids_pidof() {
pidof -c -o $$ -o $PPID -o %PPID -x "$1" || \
pidof -c -o $$ -o $PPID -o %PPID -x "${1##*/}"
}
# A function to start a program.
daemon() {
# Test syntax.
local gotbase= force= nicelevel corelimit
local pid base= user= nice= bg= pid_file=
local cgroup=
nicelevel=0
while [ "$1" != "${1##[-+]}" ]; do
case $1 in
'')
echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
return 1
;;
--check)
base=$2
gotbase="yes"
shift 2
;;
--check=?*)
base=${1#--check=}
gotbase="yes"
shift
;;
--user)
user=$2
shift 2
;;
--user=?*)
user=${1#--user=}
shift
;;
--pidfile)
pid_file=$2
shift 2
;;
--pidfile=?*)
pid_file=${1#--pidfile=}
shift
;;
--force)
force="force"
shift
;;
[-+][0-9]*)
nice="nice -n $1"
shift
;;
*)
echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
return 1
;;
esac
done
# Save basename.
[ -z "$gotbase" ] && base=${1##*/}
# See if it's already running. Look *only* at the pid file.
__pids_var_run "$base" "$pid_file"
[ -n "$pid" -a -z "$force" ] && return
# make sure it doesn't core dump anywhere unless requested
corelimit="ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0}"
# if they set NICELEVEL in /etc/sysconfig/foo, honor it
[ -n "${NICELEVEL:-}" ] && nice="nice -n $NICELEVEL"
# if they set CGROUP_DAEMON in /etc/sysconfig/foo, honor it
if [ -n "${CGROUP_DAEMON}" ]; then
if [ ! -x /bin/cgexec ]; then
echo -n "Cgroups not installed"; warning
echo
else
cgroup="/bin/cgexec";
for i in $CGROUP_DAEMON; do
cgroup="$cgroup -g $i";
done
fi
fi
# Echo daemon
[ "${BOOTUP:-}" = "verbose" -a -z "${LSB:-}" ] && echo -n " $base"
# And start it up.
if [ -z "$user" ]; then
$cgroup $nice /bin/bash -c "$corelimit >/dev/null 2>&1 ; $*"
else
$cgroup $nice runuser -s /bin/bash $user -c "$corelimit >/dev/null 2>&1 ; $*"
fi
[ "$?" -eq 0 ] && success $"$base startup" || failure $"$base startup"
}
# A function to stop a program.
killproc() {
local RC killlevel= base pid pid_file= delay try binary=
RC=0; delay=3; try=0
# Test syntax.
if [ "$#" -eq 0 ]; then
echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
return 1
fi
if [ "$1" = "-p" ]; then
pid_file=$2
shift 2
fi
if [ "$1" = "-b" ]; then
if [ -z $pid_file ]; then
echo $"-b option can be used only with -p"
echo $"Usage: killproc -p pidfile -b binary program"
return 1
fi
binary=$2
shift 2
fi
if [ "$1" = "-d" ]; then
delay=$(echo $2 | awk -v RS=' ' -v IGNORECASE=1 '{if($1!~/^[0-9.]+[smhd]?$/) exit 1;d=$1~/s$|^[0-9.]*$/?1:$1~/m$/?60:$1~/h$/?60*60:$1~/d$/?24*60*60:-1;if(d==-1) exit 1;delay+=d*$1} END {printf("%d",delay+0.5)}')
if [ "$?" -eq 1 ]; then
echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
return 1
fi
shift 2
fi
# check for second arg to be kill level
[ -n "${2:-}" ] && killlevel=$2
# Save basename.
base=${1##*/}
# Find pid.
__pids_var_run "$1" "$pid_file" "$binary"
RC=$?
if [ -z "$pid" ]; then
if [ -z "$pid_file" ]; then
pid="$(__pids_pidof "$1")"
else
[ "$RC" = "4" ] && { failure $"$base shutdown" ; return $RC ;}
fi
fi
# Kill it.
if [ -n "$pid" ] ; then
[ "$BOOTUP" = "verbose" -a -z "${LSB:-}" ] && echo -n "$base "
if [ -z "$killlevel" ] ; then
__kill_pids_term_kill -d $delay $pid
RC=$?
[ "$RC" -eq 0 ] && success $"$base shutdown" || failure $"$base shutdown"
# use specified level only
else
if checkpid $pid; then
kill $killlevel $pid >/dev/null 2>&1
RC=$?
[ "$RC" -eq 0 ] && success $"$base $killlevel" || failure $"$base $killlevel"
elif [ -n "${LSB:-}" ]; then
RC=7 # Program is not running
fi
fi
else
if [ -n "${LSB:-}" -a -n "$killlevel" ]; then
RC=7 # Program is not running
else
failure $"$base shutdown"
RC=0
fi
fi
# Remove pid file if any.
if [ -z "$killlevel" ]; then
rm -f "${pid_file:-/run/$base.pid}"
fi
return $RC
}
# A function to find the pid of a program. Looks *only* at the pidfile
pidfileofproc() {
local pid
# Test syntax.
if [ "$#" = 0 ] ; then
echo $"Usage: pidfileofproc {program}"
return 1
fi
__pids_var_run "$1"
[ -n "$pid" ] && echo $pid
return 0
}
# A function to find the pid of a program.
pidofproc() {
local RC pid pid_file=
# Test syntax.
if [ "$#" = 0 ]; then
echo $"Usage: pidofproc [-p pidfile] {program}"
return 1
fi
if [ "$1" = "-p" ]; then
pid_file=$2
shift 2
fi
fail_code=3 # "Program is not running"
# First try "/run/*.pid" files
__pids_var_run "$1" "$pid_file"
RC=$?
if [ -n "$pid" ]; then
echo $pid
return 0
fi
[ -n "$pid_file" ] && return $RC
__pids_pidof "$1" || return $RC
}
status() {
local base pid lock_file= pid_file= binary=
# Test syntax.
if [ "$#" = 0 ] ; then
echo $"Usage: status [-p pidfile] {program}"
return 1
fi
if [ "$1" = "-p" ]; then
pid_file=$2
shift 2
fi
if [ "$1" = "-l" ]; then
lock_file=$2
shift 2
fi
if [ "$1" = "-b" ]; then
if [ -z $pid_file ]; then
echo $"-b option can be used only with -p"
echo $"Usage: status -p pidfile -b binary program"
return 1
fi
binary=$2
shift 2
fi
base=${1##*/}
if [ "$_use_systemctl" = "1" ]; then
systemctl status ${0##*/}.service
ret=$?
# LSB daemons that dies abnormally in systemd looks alive in systemd's eyes due to RemainAfterExit=yes
# lets adjust the reality a little bit
if systemctl show -p ActiveState ${0##*/}.service | grep -q '=active$' && \
systemctl show -p SubState ${0##*/}.service | grep -q '=exited$' ; then
ret=3
fi
return $ret
fi
# First try "pidof"
__pids_var_run "$1" "$pid_file" "$binary"
RC=$?
if [ -z "$pid_file" -a -z "$pid" ]; then
pid="$(__pids_pidof "$1")"
fi
if [ -n "$pid" ]; then
echo $"${base} (pid $pid) is running..."
return 0
fi
case "$RC" in
0)
echo $"${base} (pid $pid) is running..."
return 0
;;
1)
echo $"${base} dead but pid file exists"
return 1
;;
4)
echo $"${base} status unknown due to insufficient privileges."
return 4
;;
esac
if [ -z "${lock_file}" ]; then
lock_file=${base}
fi
# See if /var/lock/subsys/${lock_file} exists
if [ -f /var/lock/subsys/${lock_file} ]; then
echo $"${base} dead but subsys locked"
return 2
fi
echo $"${base} is stopped"
return 3
}
echo_success() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
echo -n $" OK "
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
return 0
}
echo_failure() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
echo -n $"FAILED"
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
return 1
}
echo_passed() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
echo -n $"PASSED"
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
return 1
}
echo_warning() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
echo -n $"WARNING"
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
return 1
}
# Inform the graphical boot of our current state
update_boot_stage() {
if [ -x /bin/plymouth ]; then
/bin/plymouth --update="$1"
fi
return 0
}
# Log that something succeeded
success() {
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_success
return 0
}
# Log that something failed
failure() {
local rc=$?
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_failure
[ -x /bin/plymouth ] && /bin/plymouth --details
return $rc
}
# Log that something passed, but may have had errors. Useful for fsck
passed() {
local rc=$?
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_passed
return $rc
}
# Log a warning
warning() {
local rc=$?
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_warning
return $rc
}
# Run some action. Log its output.
action() {
local STRING rc
STRING=$1
echo -n "$STRING "
shift
"$@" && success $"$STRING" || failure $"$STRING"
rc=$?
echo
return $rc
}
# returns OK if $1 contains $2
strstr() {
[ "${1#*$2*}" = "$1" ] && return 1
return 0
}
# Check whether file $1 is a backup or rpm-generated file and should be ignored
is_ignored_file() {
case "$1" in
*~ | *.bak | *.old | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
return 0
;;
esac
return 1
}
# Convert the value ${1} of time unit ${2}-seconds into seconds:
convert2sec() {
local retval=""
case "${2}" in
deci) retval=$(awk "BEGIN {printf \"%.1f\", ${1} / 10}") ;;
centi) retval=$(awk "BEGIN {printf \"%.2f\", ${1} / 100}") ;;
mili) retval=$(awk "BEGIN {printf \"%.3f\", ${1} / 1000}") ;;
micro) retval=$(awk "BEGIN {printf \"%.6f\", ${1} / 1000000}") ;;
nano) retval=$(awk "BEGIN {printf \"%.9f\", ${1} / 1000000000}") ;;
piko) retval=$(awk "BEGIN {printf \"%.12f\", ${1} / 1000000000000}") ;;
esac
echo "${retval}"
}
# Evaluate shvar-style booleans
is_true() {
case "$1" in
[tT] | [yY] | [yY][eE][sS] | [oO][nN] | [tT][rR][uU][eE] | 1)
return 0
;;
esac
return 1
}
# Evaluate shvar-style booleans
is_false() {
case "$1" in
[fF] | [nN] | [nN][oO] | [oO][fF][fF] | [fF][aA][lL][sS][eE] | 0)
return 0
;;
esac
return 1
}
# Apply sysctl settings, including files in /etc/sysctl.d
apply_sysctl() {
if [ -x /lib/systemd/systemd-sysctl ]; then
/lib/systemd/systemd-sysctl
else
for file in /usr/lib/sysctl.d/*.conf ; do
is_ignored_file "$file" && continue
[ -f /run/sysctl.d/${file##*/} ] && continue
[ -f /etc/sysctl.d/${file##*/} ] && continue
test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
done
for file in /run/sysctl.d/*.conf ; do
is_ignored_file "$file" && continue
[ -f /etc/sysctl.d/${file##*/} ] && continue
test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
done
for file in /etc/sysctl.d/*.conf ; do
is_ignored_file "$file" && continue
test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
done
sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
fi
}
# A sed expression to filter out the files that is_ignored_file recognizes
__sed_discard_ignored_files='/\(~\|\.bak\|\.old\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
if [ "$_use_systemctl" = "1" ]; then
if [ "x$1" = xstart -o \
"x$1" = xstop -o \
"x$1" = xrestart -o \
"x$1" = xreload -o \
"x$1" = xtry-restart -o \
"x$1" = xforce-reload -o \
"x$1" = xcondrestart ] ; then
systemctl_redirect $0 $1
exit $?
fi
fi
strstr "$(cat /proc/cmdline)" "rc.debug" && set -x
return 0