Your IP : 216.73.216.86
PK 쥐\S�g�t4 t4 site-functions/_curlnu �[��� #compdef curl
# curl zsh completion
local curcontext="$curcontext" state state_descr line
typeset -A opt_args
local rc=1
_arguments -C -S \
--happy-eyeballs-timeout-ms'[How long to wait in milliseconds for IPv6 before trying IPv4]':'<milliseconds>' \
--aws-sigv4'[Use AWS V4 signature authentication]':'<provider1[:provider2[:region[:service]]]>' \
{-c,--cookie-jar}'[Write cookies to <filename> after operation]':'<filename>':_files \
{-D,--dump-header}'[Write the received headers to <filename>]':'<filename>':_files \
{-y,--speed-time}'[Trigger '\''speed-limit'\'' abort after this time]':'<seconds>' \
--proxy-cacert'[CA certificate to verify peer against for proxy]':'<file>':_files \
--tls13-ciphers'[of TLS 1.3 ciphersuites> TLS 1.3 cipher suites to use]':'<list' \
{-E,--cert}'[Client certificate file and password]':'<certificate[:password]>' \
--libcurl'[Dump libcurl equivalent code of this command line]':'<file>':_files \
--proxy-capath'[CA directory to verify peer against for proxy]':'<dir>':_files \
--proxy-negotiate'[HTTP Negotiate (SPNEGO) authentication on the proxy]':'Use' \
--proxy-pinnedpubkey'[FILE/HASHES public key to verify proxy with]':'<hashes>' \
--crlfile'[Get a CRL list in PEM format from the given file]':'<file>':_files \
--proxy-insecure'[HTTPS proxy connections without verifying the proxy]':'Do' \
--proxy-ssl-allow-beast'[security flaw for interop for HTTPS proxy]':'Allow' \
--abstract-unix-socket'[Connect via abstract Unix domain socket]':'<path>' \
--pinnedpubkey'[FILE/HASHES Public key to verify peer against]':'<hashes>' \
--proxy-pass'[Pass phrase for the private key for HTTPS proxy]':'<phrase>' \
{-p,--proxytunnel}'[Operate through an HTTP proxy tunnel (using CONNECT)]' \
--socks5-hostname'[SOCKS5 proxy, pass host name to proxy]':'<host[:port]>' \
--proto-default'[Use PROTOCOL for any URL missing a scheme]':'<protocol>' \
--proxy-tls13-ciphers'[list> TLS 1.3 proxy cipher suites]':'<ciphersuite' \
--socks5-gssapi-service'[SOCKS5 proxy service name for GSS-API]':'<name>' \
--ftp-alternative-to-user'[String to replace USER \[name\]]':'<command>' \
--ftp-ssl-control'[SSL/TLS for FTP login, clear for transfer]':'Require' \
{-T,--upload-file}'[Transfer local FILE to destination]':'<file>':_files \
--local-port'[Force use of RANGE for local port numbers]':'<num/range>' \
--proxy-tlsauthtype'[TLS authentication type for HTTPS proxy]':'<type>' \
{-R,--remote-time}'[Set the remote file'\''s time on the local output]' \
--retry-connrefused'[on connection refused (use with --retry)]':'Retry' \
--suppress-connect-headers'[proxy CONNECT response headers]':'Suppress' \
{-j,--junk-session-cookies}'[session cookies read from file]':'Ignore' \
--location-trusted'[--location, and send auth to other hosts]':'Like' \
--proxy-cert-type'[Client certificate type for HTTPS proxy]':'<type>' \
{-O,--remote-name}'[Write output to a file named as the remote file]' \
--trace-ascii'[Like --trace, but without hex output]':'<file>':_files \
--connect-timeout'[Maximum time allowed for connection]':'<seconds>' \
--expect100-timeout'[How long to wait for 100-continue]':'<seconds>' \
{-g,--globoff}'[Disable URL sequences and ranges using {} and \[\]]' \
{-m,--max-time}'[Maximum time allowed for the transfer]':'<seconds>' \
--dns-ipv4-addr'[IPv4 address to use for DNS requests]':'<address>' \
--dns-ipv6-addr'[IPv6 address to use for DNS requests]':'<address>' \
--ignore-content-length'[the size of the remote resource]':'Ignore' \
{-k,--insecure}'[Allow insecure server connections when using SSL]' \
--mail-auth'[Originator address of the original email]':'<address>' \
--noproxy'[List of hosts which do not use proxy]':'<no-proxy-list>' \
--proto-redir'[Enable/disable PROTOCOLS on redirect]':'<protocols>' \
--dns-interface'[Interface to use for DNS requests]':'<interface>' \
--hostpubmd5'[Acceptable MD5 hash of the host public key]':'<md5>' \
--keepalive-time'[Interval time for keepalive probes]':'<seconds>' \
--proxy-cert'[Set client certificate for proxy]':'<cert[:passwd]>' \
--random-file'[File for reading random data from]':'<file>':_files \
--socks5-basic'[Enable username/password auth for SOCKS5 proxies]' \
--cacert'[CA certificate to verify peer against]':'<file>':_files \
{-H,--header}'[Pass custom header(s) to server]':'<header/@file>' \
{-i,--include}'[Include protocol response headers in the output]' \
--proxy-header'[Pass custom header(s) to proxy]':'<header/@file>' \
--unix-socket'[Connect through this Unix domain socket]':'<path>' \
{-w,--write-out}'[Use output FORMAT after completion]':'<format>' \
--http2-prior-knowledge'[HTTP 2 without HTTP/1.1 Upgrade]':'Use' \
{-o,--output}'[Write to file instead of stdout]':'<file>':_files \
{-J,--remote-header-name}'[the header-provided filename]':'Use' \
--socks4a'[SOCKS4a proxy on given host + port]':'<host[:port]>' \
{-Y,--speed-limit}'[Stop transfers slower than this]':'<speed>' \
{-z,--time-cond}'[Transfer based on a time condition]':'<time>' \
--capath'[CA directory to verify peer against]':'<dir>':_files \
{-f,--fail}'[Fail silently (no output at all) on HTTP errors]' \
--proxy-tlspassword'[TLS password for HTTPS proxy]':'<string>' \
{-U,--proxy-user}'[Proxy user and password]':'<user:password>' \
--proxy1.0'[Use HTTP/1.0 proxy on given port]':'<host[:port]>' \
{-r,--range}'[Retrieve only the bytes within RANGE]':'<range>' \
{-A,--user-agent}'[Send User-Agent <name> to server]':'<name>' \
--egd-file'[EGD socket path for random data]':'<file>':_files \
--fail-early'[Fail on first transfer error, do not continue]' \
--haproxy-protocol'[HAProxy PROXY protocol v1 header]':'Send' \
--preproxy'[Use this proxy first]':'[protocol://]host[:port]' \
--retry-max-time'[Retry only within this period]':'<seconds>' \
--socks4'[SOCKS4 proxy on given host + port]':'<host[:port]>' \
--socks5'[SOCKS5 proxy on given host + port]':'<host[:port]>' \
--socks5-gssapi-nec'[with NEC SOCKS5 server]':'Compatibility' \
--ssl-allow-beast'[security flaw to improve interop]':'Allow' \
--cert-status'[Verify the status of the server certificate]' \
--ftp-create-dirs'[the remote dirs if not present]':'Create' \
{-:,--next}'[Make next URL use its separate set of options]' \
--proxy-key-type'[Private key file type for proxy]':'<type>' \
--remote-name-all'[the remote file name for all URLs]':'Use' \
{-X,--request}'[Specify request command to use]':'<command>' \
--retry'[Retry request if transient problems occur]':'<num>' \
--ssl-no-revoke'[cert revocation checks (WinSSL)]':'Disable' \
--cert-type'[Certificate file type (DER/PEM/ENG)]':'<type>' \
--connect-to'[Connect to host]':'<HOST1:PORT1:HOST2:PORT2>' \
--create-dirs'[Create necessary local directory hierarchy]' \
--max-redirs'[Maximum number of redirects allowed]':'<num>' \
{-n,--netrc}'[Must read .netrc for user name and password]' \
--proxy-crlfile'[Set a CRL list for proxy]':'<file>':_files \
--sasl-ir'[Enable initial response in SASL authentication]' \
--socks5-gssapi'[GSS-API auth for SOCKS5 proxies]':'Enable' \
--interface'[Use network INTERFACE (or address)]':'<name>' \
--key-type'[Private key file type (DER/PEM/ENG)]':'<type>' \
--netrc-file'[Specify FILE for netrc]':'<filename>':_files \
{-N,--no-buffer}'[Disable buffering of the output stream]' \
--proxy-service-name'[SPNEGO proxy service name]':'<name>' \
--styled-output'[styled output for HTTP headers]':'Enable' \
--max-filesize'[Maximum file size to download]':'<bytes>' \
--negotiate'[Use HTTP Negotiate (SPNEGO) authentication]' \
--no-keepalive'[Disable TCP keepalive on the connection]' \
{-#,--progress-bar}'[Display transfer progress as a bar]' \
{-x,--proxy}'[Use this proxy]':'[protocol://]host[:port]' \
--proxy-anyauth'[any proxy authentication method]':'Pick' \
{-Q,--quote}'[Send command(s) to server before transfer]' \
--request-target'[the target for this request]':'Specify' \
{-u,--user}'[Server user and password]':'<user:password>' \
{-K,--config}'[Read config from a file]':'<file>':_files \
{-C,--continue-at}'[Resumed transfer offset]':'<offset>' \
--data-raw'[HTTP POST data, '\''@'\'' allowed]':'<data>' \
--disallow-username-in-url'[username in url]':'Disallow' \
--krb'[Enable Kerberos with security <level>]':'<level>' \
--proxy-ciphers'[SSL ciphers to use for proxy]':'<list>' \
--proxy-digest'[Use Digest authentication on the proxy]' \
--proxy-tlsuser'[TLS username for HTTPS proxy]':'<name>' \
{-b,--cookie}'[Send cookies from string/file]':'<data>' \
--data-urlencode'[HTTP POST data url encoded]':'<data>' \
--delegation'[GSS-API delegation permission]':'<LEVEL>' \
{-P,--ftp-port}'[Use PORT instead of PASV]':'<address>' \
--post301'[Do not switch to GET after following a 301]' \
--post302'[Do not switch to GET after following a 302]' \
--post303'[Do not switch to GET after following a 303]' \
--trace-time'[Add time stamps to trace/verbose output]' \
--dns-servers'[DNS server addrs to use]':'<addresses>' \
{-G,--get}'[Put the post data in the URL and use GET]' \
--limit-rate'[Limit transfer speed to RATE]':'<speed>' \
--ntlm-wb'[Use HTTP NTLM authentication with winbind]' \
--path-as-is'[Do not squash .. sequences in URL path]' \
--proxy-basic'[Use Basic authentication on the proxy]' \
--retry-delay'[Wait time between retries]':'<seconds>' \
--trace'[Write a debug trace to FILE]':'<file>':_files \
{-a,--append}'[Append to target file when uploading]' \
--ftp-ssl-ccc-mode'[Set CCC mode]':'<active/passive>' \
--metalink'[Process given URLs as metalink XML file]' \
--tr-encoding'[Request compressed transfer encoding]' \
--xattr'[Store metadata in extended file attributes]' \
--ftp-skip-pasv-ip'[the IP address for PASV]':'Skip' \
--pass'[Pass phrase for the private key]':'<phrase>' \
--proxy-ntlm'[Use NTLM authentication on the proxy]' \
{-S,--show-error}'[Show error even when -s is used]' \
--ciphers'[of ciphers> SSL ciphers to use]':'<list' \
--form-string'[Specify multipart MIME data]':'<name=string>' \
--login-options'[Server login options]':'<options>' \
--tftp-blksize'[Set TFTP BLKSIZE option]':'<value>' \
--tftp-no-options'[not send any TFTP options]':'Do' \
{-v,--verbose}'[Make the operation more talkative]' \
--proxy-key'[Private key for HTTPS proxy]':'<key>' \
{-F,--form}'[Specify multipart MIME data]':'<name=content>' \
--mail-from'[Mail from this address]':'<address>' \
--oauth2-bearer'[OAuth 2 Bearer Token]':'<token>' \
--proto'[Enable/disable PROTOCOLS]':'<protocols>' \
--tlsauthtype'[TLS authentication type]':'<type>' \
--no-sessionid'[Disable SSL session-ID reusing]' \
--data-binary'[HTTP POST binary data]':'<data>' \
--mail-rcpt'[Mail to this address]':'<address>' \
{-t,--telnet-option}'[Set telnet option]':'<opt=val>' \
--tls-max'[Use TLSv1.0 or greater]':'<VERSION>' \
--ftp-ssl-ccc'[Send CCC after authenticating]' \
{-4,--ipv4}'[Resolve names to IPv4 addresses]' \
{-6,--ipv6}'[Resolve names to IPv6 addresses]' \
--netrc-optional'[either .netrc or URL]':'Use' \
--service-name'[SPNEGO service name]':'<name>' \
{-V,--version}'[Show version number and quit]' \
--data-ascii'[HTTP POST ASCII data]':'<data>' \
--ftp-account'[Account data string]':'<data>' \
--compressed-ssh'[SSH compression]':'Enable' \
--disable-eprt'[Inhibit using EPRT or LPRT]' \
--ftp-method'[Control CWD usage]':'<method>' \
--pubkey'[SSH Public key file name]':'<key>' \
--raw'[Do HTTP "raw"; no transfer decoding]' \
--anyauth'[Pick any authentication method]' \
--compressed'[Request compressed response]' \
--ftp-pasv'[Use PASV/EPSV instead of PORT]' \
--no-alpn'[Disable the ALPN TLS extension]' \
--tcp-nodelay'[Use the TCP_NODELAY option]' \
{-B,--use-ascii}'[Use ASCII/text transfer]' \
--digest'[Use HTTP Digest Authentication]' \
--proxy-tlsv1'[Use TLSv1 for HTTPS proxy]' \
--engine'[Crypto engine to use]':'<name>' \
--no-npn'[Disable the NPN TLS extension]' \
--basic'[Use HTTP Basic Authentication]' \
{-M,--manual}'[Display the full manual]' \
--false-start'[Enable TLS False Start]' \
--crlf'[Convert LF to CRLF in upload]' \
{-d,--data}'[HTTP POST data]':'<data>' \
{-I,--head}'[Show document info only]' \
--key'[Private key file name]':'<key>' \
--ntlm'[Use HTTP NTLM authentication]' \
{-e,--referer}'[Referrer URL]':'<URL>' \
{-1,--tlsv1}'[Use TLSv1.0 or greater]' \
--disable-epsv'[Inhibit using EPSV]' \
--stderr'[Where to redirect stderr]' \
--ftp-pret'[Send PRET before PASV]' \
{-L,--location}'[Follow redirects]' \
--tcp-fastopen'[Use TCP Fast Open]' \
--tlsuser'[TLS user name]':'<name>' \
{-l,--list-only}'[List only mode]' \
{-q,--disable}'[Disable .curlrc]' \
--url'[URL to work with]':'<url>' \
{-0,--http1.0}'[Use HTTP 1.0]' \
{-h,--help}'[This help text]' \
--ssl-reqd'[Require SSL/TLS]' \
--tlspassword'[TLS password]' \
{-s,--silent}'[Silent mode]' \
--http1.1'[Use HTTP 1.1]' \
{-2,--sslv2}'[Use SSLv2]' \
{-3,--sslv3}'[Use SSLv3]' \
--tlsv1.0'[Use TLSv1.0]' \
--tlsv1.1'[Use TLSv1.1]' \
--tlsv1.2'[Use TLSv1.2]' \
--tlsv1.3'[Use TLSv1.3]' \
--http2'[Use HTTP 2]' \
--ssl'[Try SSL/TLS]' \
'*:URL:_urls' && rc=0
return rc
PK 쥐\D+~�� � site-functions/_busctlnu �[��� #compdef busctl
# SPDX-License-Identifier: LGPL-2.1+
# busctl(1) completion -*- shell-script -*-
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# systemd is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with systemd; If not, see <http://www.gnu.org/licenses/>.
(( $+functions[_busctl_command] )) || _busctl_command()
{
local -a _busctl_cmds
_busctl_cmds=(
"list:List bus names"
"status:Show bus service, process or bus owner credentials"
"monitor:Show bus traffic"
"capture:Capture bus traffix as pcap"
"tree:Show object tree of service"
"introspect:Introspect object"
"call:Call a method"
"get-property:Get property value"
"set-property:Set property value"
)
if (( CURRENT == 1 )); then
_describe -t commands 'busctl command' _busctl_cmds || compadd "$@"
else
local curcontext="$curcontext"
cmd="${${_busctl_cmds[(r)$words[1]:*]%%:*}}"
if (( $+functions[_busctl_$cmd] )); then
_busctl_$cmd
else
_message "no more options"
fi
fi
}
_arguments \
{-h,--help}'[Prints a short help text and exits.]' \
'--version[Prints a short version string and exits.]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-legend[Do not show the headers and footers]' \
'--system[Connect to system manager]' \
'--user[Connect to user service manager]' \
{-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
{-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
'--address=[Connect to the bus specified by address]:address' \
'--show-machine[Show machine ID column in list]' \
'--unique[Only show unique names]' \
'--acquired[Only show acquired names]' \
'--activatable[Only show activatable names]' \
'--match=[Only show matching messages]:match' \
'--list[Do not show tree, but simple object path list]' \
'--quiet[Do not show method call reply]'\
'--verbose[Show result values in long format]' \
'--expect-reply=[Expect a method call reply]:boolean:(1 0)' \
'--auto-start=[Auto-start destination service]:boolean:(1 0)' \
'--allow-interactive-authorization=[Allow interactive authorization for operation]:boolean:(1 0)' \
'--timeout=[Maximum time to wait for method call completion]:timeout (seconds)' \
'--augment-creds=[Extend credential data with data read from /proc/$PID]:boolean:(1 0)' \
'*::busctl command:_busctl_command'
PK 쥐\B�V�. . site-functions/_coredumpctlnu �[��� #compdef coredumpctl
# SPDX-License-Identifier: LGPL-2.1+
_coredumpctl_command(){
local -a _coredumpctl_cmds
_coredumpctl_cmds=(
'list:List available coredumps'
'info:Show detailed information about one or more coredumps'
'dump:Print coredump to stdout'
'gdb:Start gdb on a coredump'
)
if (( CURRENT == 1 )); then
_describe -t commands 'coredumpctl command' _coredumpctl_cmds
else
local curcontext="$curcontext"
local -a _dumps
cmd="${${_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
_dumps=( "${(f)$(coredumpctl list --no-legend | awk 'BEGIN{OFS=":"} {sub(/[[ \t]+/, ""); print $4,$0}' 2>/dev/null)}" )
if [[ -n "$_dumps" ]]; then
_describe -V -t pids 'coredumps' _dumps
else
_message "no coredumps"
fi
else
_message "no more options"
fi
fi
}
_arguments \
{-o+,--output=}'[Write output to FILE]:output file:_files' \
{-F+,--field=}'[Show field in list output]:field' \
'-1[Show information about most recent entry only]' \
{-S,--since}'[Print entries since the specified date]' \
{-U,--until}'[Print entries until the specified date]' \
{-r,--reverse}'[Show the newest entries first]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-legend[Do not print the column headers]' \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'*::coredumpctl commands:_coredumpctl_command'
PK 쥐\��m� � site-functions/_hostnamectlnu �[��� #compdef hostnamectl
# SPDX-License-Identifier: LGPL-2.1+
_hostnamectl_set-hostname() {
if (( CURRENT <= 3 )); then
_message "new hostname"
else
_message "no more options"
fi
}
_hostnamectl_set-icon-name() {
if (( CURRENT <= 3 )); then
_message "new icon name"
else
_message "no more options"
fi
}
_hostnamectl_set-chassis() {
if (( CURRENT <= 3 )); then
_chassis=( desktop laptop convertible server tablet handset watch embedded vm container )
_describe chassis _chassis
else
_message "no more options"
fi
}
_hostnamectl_set-deployment() {
if (( CURRENT <= 3 )); then
_message "new environment"
else
_message "no more options"
fi
}
_hostnamectl_set-location() {
if (( CURRENT <= 3 )); then
_message "new location"
else
_message "no more options"
fi
}
_hostnamectl_command() {
local -a _hostnamectl_cmds
_hostnamectl_cmds=(
"status:Show current hostname settings"
"set-hostname:Set system hostname"
"set-icon-name:Set icon name for host"
"set-chassis:Set chassis type for host"
"set-deployment:Set deployment environment for host"
"set-location:Set location for host"
)
if (( CURRENT == 1 )); then
_describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
else
local curcontext="$curcontext"
cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
if [[ $cmd == status ]]; then
_message "no options"
else
_hostnamectl_$cmd
fi
else
_message "unknown hostnamectl command: $words[1]"
fi
fi
}
_arguments -s \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--transient[Only set transient hostname]' \
'--static[Only set static hostname]' \
'--pretty[Only set pretty hostname]' \
'--no-ask-password[Do not prompt for password]' \
{-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
{-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
'*::hostnamectl commands:_hostnamectl_command'
PK 쥐\:�i�W W site-functions/_journalctlnu �[��� #compdef journalctl
# SPDX-License-Identifier: LGPL-2.1+
_list_fields() {
local -a journal_fields
journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
_{P,U,G}ID _COMM _EXE _CMDLINE
_AUDIT_{SESSION,LOGINUID}
_SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
_SYSTEMD_USER_UNIT USER_UNIT
_SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
_{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
_KERNEL_{DEVICE,SUBSYSTEM}
_UDEV_{SYSNAME,DEVNODE,DEVLINK}
__CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
case $_jrnl_none in
yes) _values -s '=' 'possible fields' \
"${journal_fields[@]}:value:_journal_fields ${words[CURRENT]%%=*}" ;;
*) _describe 'possible fields' journal_fields ;;
esac
}
_journal_none() {
local -a _commands _files _jrnl_none
# Setting use-cache will slow this down considerably
_commands=( ${"$(_call_program commands "$service $_sys_service_mgr -F _EXE" 2>/dev/null)"} )
_jrnl_none='yes'
_alternative : \
'files:/dev files:_files -W /dev -P /dev/' \
"commands:commands:($_commands[@])" \
'fields:fields:_list_fields'
}
_journal_fields() {
local -a _fields cmd
cmd=("journalctl $_sys_service_mgr" "-F ${@[-1]}" "2>/dev/null" )
_fields=$(_call_program fields $cmd[@])
_fields=${_fields//'\'/'\\'}
_fields=${_fields//':'/'\:'}
_fields=( ${(f)_fields} )
typeset -U _fields
_describe 'possible values' _fields
}
_journal_boots() {
local -a _bootid _previousboots
_bootid=( ${(f)"$(_call_program bootid "$service -F _BOOT_ID")"} )
_previousboots=( -{1..${#_bootid}} )
_alternative : \
"offsets:boot offsets:compadd -a '_previousboots[1,-2]'" \
"bootid:boot ids:compadd -a _bootid"
}
# Build arguments for "journalctl" to be used in completion.
# Use both --user and --system modes, they are not exclusive.
local -a _modes; _modes=(--user --system)
local -a _modes_with_arg; _modes_with_arg=(--directory -D --file -M --machine --root)
typeset -a _sys_service_mgr
local w k v i=0 n=$#words
while (( i++ < n )); do
w=$words[$i]
if (( $_modes[(I)$w] )); then
_sys_service_mgr+=($w)
else
# Handle options with arguments. "--key=value" and "--key value".
k=${w%%=*}
if (( ${_modes_with_arg[(I)$k]} )); then
v=${w#*=}
if [[ "$k" != "$w" ]]; then
# "--key=value" style.
_sys_service_mgr+=($w)
else
# "--key value" style.
_sys_service_mgr+=($w ${words[((++i))]})
fi
fi
fi
done
_arguments -s \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--no-pager[Do not pipe output into a pager]' \
{-l,--full}'[Show long fields in full]' \
{-a,--all}'[Show all fields, including long and unprintable]' \
{-f,--follow}'[Follow journal]' \
{-e,--pager-end}'[Jump to the end of the journal in the pager]' \
{-n+,--lines=}'[Number of journal entries to show]:integer' \
'--no-tail[Show all lines, even in follow mode]' \
{-r,--reverse}'[Reverse output]' \
{-o+,--output=}'[Change journal output mode]:output modes:_sd_outputmodes' \
{-x,--catalog}'[Show explanatory texts with each log line]' \
{-q,--quiet}"[Don't show privilege warning]" \
{-m,--merge}'[Show entries from all available journals]' \
{-b+,--boot=}'[Show data only from the specified boot or offset]::boot id or offset:_journal_boots' \
'--list-boots[List boots ordered by time]' \
{-k,--dmesg}'[Show only kernel messages from the current boot]' \
{-u+,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
'--user-unit=[Show data only from the specified user session unit]:units:_journal_fields USER_UNIT' \
{-p+,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
{-t+,--identifier=}'[Show only messages with the specified syslog identifier]:identifier:_journal_fields SYSLOG_IDENTIFIER' \
{-c+,--cursor=}'[Start showing entries from the specified cursor]:cursors:_journal_fields __CURSORS' \
'--after-cursor=[Start showing entries from after the specified cursor]:cursors:_journal_fields __CURSORS' \
'--since=[Start showing entries on or newer than the specified date]:YYYY-MM-DD HH\:MM\:SS' \
'--until=[Stop showing entries on or older than the specified date]:YYYY-MM-DD HH\:MM\:SS' \
{-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
'--system[Show system and kernel messages]' \
'--user[Show messages from user services]' \
'(--directory -D -M --machine --root --file)'{-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
'(--directory -D -M --machine --root --file)'{-D+,--directory=}'[Show journal files from directory]:directories:_directories' \
'(--directory -D -M --machine --root --file)--root=[Operate on catalog hierarchy under specified directory]:directories:_directories' \
'(--directory -D -M --machine --root)*--file=[Operate on specified journal files]:file:_files' \
'--new-id128[Generate a new 128 Bit ID]' \
'--header[Show journal header information]' \
'--disk-usage[Show total disk usage]' \
'--list-catalog[List messages in catalog]' \
'--dump-catalog[Dump messages in catalog]' \
'--update-catalog[Update binary catalog database]' \
'--setup-keys[Generate a new FSS key pair]' \
'--force[Force recreation of the FSS keys]' \
'--interval=[Time interval for changing the FSS sealing key]:time interval' \
'--verify[Verify journal file consistency]' \
'--verify-key=[Specify FSS verification key]:FSS key' \
'*::default: _journal_none'
PK 쥐\�t� site-functions/_localectlnu �[��� #compdef localectl
# SPDX-License-Identifier: LGPL-2.1+
_localectl_set-locale() {
local -a _locales locale_fields
locale_fields=(LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME \
LC_COLLATE LC_MONETARY LC_MESSAGES LC_PAPER \
LC_NAME LC_ADDRESS LC_TELEPHONE \
LC_MEASUREMENT LC_IDENTIFICATION)
# LC_ALL is omitted on purpose
local expl suf
_locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
compset -P1 '*='
if [[ -prefix 1 *\= ]]; then
local conf=${PREFIX%%\=*}
_wanted locales expl "locales configs" \
_combination localeconfs confs=$conf locales "$@" -
else
compadd -S '=' $locale_fields
fi
}
_localectl_set-keymap() {
local -a _keymaps
if (( CURRENT <= 3 )); then
_keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
_describe keymaps _keymaps
else
_message "no more options"
fi
}
_localectl_set-x11-keymap() {
if (( $+commands[pkg-config] )); then
local -a _file _layout _model _variant _options
local _xorg_lst
_xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
_file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
_layout=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
_model=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
_variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
_options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
#_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
#_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
#_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
#_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
case $CURRENT in
2) _describe layouts _layout ;;
3) _describe models _model;;
4) _describe variants _variant;;
5) _describe options _options;;
*) _message "no more options"
esac
fi
}
_localectl_command() {
local -a _localectl_cmds
_localectl_cmds=(
'status:Show current locale settings'
'set-locale:Set system locale'
'list-locales:Show known locales'
'set-keymap:Set virtual console keyboard mapping'
'list-keymaps:Show known virtual console keyboard mappings'
'set-x11-keymap:Set X11 keyboard mapping'
'list-x11-keymap-models:Show known X11 keyboard mapping models'
'list-x11-keymap-layouts:Show known X11 keyboard mapping layouts'
'list-x11-keymap-variants:Show known X11 keyboard mapping variants'
'list-x11-keymap-options:Show known X11 keyboard mapping options'
)
if (( CURRENT == 1 )); then
_describe -t commands 'localectl command' _localectl_cmds
else
local curcontext="$curcontext"
cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
if (( $+functions[_localectl_$cmd] )); then
_localectl_$cmd
else
_message "unknown localectl command: $words[1]"
fi
fi
}
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
"--no-convert[Don't convert keyboard mappings]" \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not prompt for password]' \
{-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
{-M+,--machine=}'[Operate on local container]:machine' \
'*::localectl commands:_localectl_command'
PK 쥐\�\��� � site-functions/_loginctlnu �[��� #compdef loginctl
# SPDX-License-Identifier: LGPL-2.1+
_loginctl_all_sessions() {
local session description
loginctl --no-legend list-sessions | while read -r session description; do
_sys_all_sessions+=( "$session" )
_sys_all_sessions_descr+=( "${session}:$description" )
done
}
_loginctl_all_users() {
local uid description
loginctl --no-legend list-users | while read -r uid description; do
_sys_all_users+=( "$uid" )
_sys_all_users_descr+=( "${uid}:$description" )
done
}
_loginctl_all_seats() {
local seat description
loginctl --no-legend list-seats | while read -r seat description; do
_sys_all_seats+=( "$seat" )
_sys_all_seats_descr+=( "${seat}:$description" )
done
}
local fun
# Completion functions for SESSIONS
for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
{
local -a _sys_all_sessions{,_descr}
_loginctl_all_sessions
for _ignore in $words[2,-1]; do
_sys_all_sessions[(i)$_ignore]=()
_sys_all_sessions_descr[(i)$_ignore:*]=()
done
if zstyle -T ":completion:${curcontext}:systemd-sessions" verbose; then
_describe -t systemd-sessions session _sys_all_sessions_descr _sys_all_sessions "$@"
else
local expl
_wanted systemd-sessions expl session compadd "$@" -a _sys_all_sessions
fi
}
done
# Completion functions for USERS
for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
{
local -a _sys_all_users{,_descr}
zstyle -a ":completion:${curcontext}:users" users _sys_all_users
if ! (( $#_sys_all_users )); then
_loginctl_all_users
fi
for _ignore in $words[2,-1]; do
_sys_all_users[(i)$_ignore]=()
_sys_all_users_descr[(i)$_ignore:*]=()
done
# using the common tag `users' here, not rolling our own `systemd-users' tag
if zstyle -T ":completion:${curcontext}:users" verbose; then
_describe -t users user ${_sys_all_users_descr:+_sys_all_users_descr} _sys_all_users "$@"
else
local expl
_wanted users expl user compadd "$@" -a _sys_all_users
fi
}
done
# Completion functions for SEATS
(( $+functions[_loginctl_seats] )) || _loginctl_seats()
{
local -a _sys_all_seats{,_descr}
_loginctl_all_seats
for _ignore in $words[2,-1]; do
_sys_all_seats[(i)$_ignore]=()
_sys_all_seats_descr[(i)$_ignore:*]=()
done
if zstyle -T ":completion:${curcontext}:systemd-seats" verbose; then
_describe -t systemd-seats seat _sys_all_seats_descr _sys_all_seats "$@"
else
local expl
_wanted systemd-seats expl seat compadd "$@" -a _sys_all_seats
fi
}
for fun in seat-status show-seat terminate-seat ; do
(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
{ _loginctl_seats }
done
# Completion functions for ATTACH
(( $+functions[_loginctl_attach] )) || _loginctl_attach()
{
_arguments -w -C -S -s \
':seat:_loginctl_seats' \
'*:device:_files'
}
# no loginctl completion for:
# [STANDALONE]='list-sessions list-users list-seats flush-devices'
(( $+functions[_loginctl_command] )) || _loginctl_command()
{
local -a _loginctl_cmds
_loginctl_cmds=(
"list-sessions:List sessions"
"session-status:Show session status"
"show-session:Show properties of one or more sessions"
"activate:Activate a session"
"lock-session:Screen lock one or more sessions"
"unlock-session:Screen unlock one or more sessions"
"lock-sessions:Screen lock all current sessions"
"unlock-sessions:Screen unlock all current sessions"
"terminate-session:Terminate one or more sessions"
"kill-session:Send signal to processes of a session"
"list-users:List users"
"user-status:Show user status"
"show-user:Show properties of one or more users"
"enable-linger:Enable linger state of one or more users"
"disable-linger:Disable linger state of one or more users"
"terminate-user:Terminate all sessions of one or more users"
"kill-user:Send signal to processes of a user"
"list-seats:List seats"
"seat-status:Show seat status"
"show-seat:Show properties of one or more seats"
"attach:Attach one or more devices to a seat"
"flush-devices:Flush all device associations"
"terminate-seat:Terminate all sessions on one or more seats"
)
if (( CURRENT == 1 )); then
_describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
else
local curcontext="$curcontext" _ignore
cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
_call_function ret _loginctl_$cmd || _message 'no more arguments'
else
_message "unknown loginctl command: $words[1]"
fi
return ret
fi
}
_arguments -s \
{-h,--help}'[Show help]' \
'--version[Show package version]' \
\*{-p+,--property=}'[Show only properties by this name]:unit property' \
{-a,--all}'[Show all properties, including empty ones]' \
'--kill-who=[Who to send signal to]:killwho:(main control all)' \
{-s+,--signal=}'[Which signal to send]:signal:_signals' \
{-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
{-M+,--machine=}'[Operate on local container]:machine:_sd_machines' \
{-l,--full}'[Do not ellipsize output]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-legend[Do not show the headers and footers]' \
'--no-ask-password[Do not ask for system passwords]' \
{-n+,--lines=}'[Number of journal entries to show]' \
{-o+,--output=}'[Change journal output mode]:output modes:_sd_outputmodes' \
'*::loginctl command:_loginctl_command'
PK 쥐\��t t ( site-functions/_sd_hosts_or_user_at_hostnu �[��� #autoload
# SPDX-License-Identifier: LGPL-2.1+
_alternative \
'users-hosts:: _user_at_host' \
'hosts:: _hosts'
PK 쥐\��s?c c site-functions/_sd_machinesnu �[��� #autoload
# SPDX-License-Identifier: LGPL-2.1+
__get_machines () {
machinectl --full --no-legend --no-pager list | {while read -r a b; do echo $a; done;};
}
local -a _machines
_machines=("${(fo)$(__get_machines)}")
typeset -U _machines
if [[ -n "$_machines" ]]; then
_describe 'machines' _machines
else
_message 'no machines'
fi
PK 쥐\ڿ�+! ! site-functions/_sd_outputmodesnu �[��� #autoload
# SPDX-License-Identifier: LGPL-2.1+
local -a _output_opts
_output_opts=(short short-full short-iso short-iso-precise short-precise short-monotonic short-unix verbose export json json-pretty json-sse cat with-unit)
_describe -t output 'output mode' _output_opts || compadd "$@"
PK 쥐\�5t� � site-functions/_sd_unit_filesnu �[��� #autoload
# SPDX-License-Identifier: LGPL-2.1+
_sd_unit_files() {
local files expl
files=( '*:files:->files' )
_description files expl 'unit file'
_files "$expl[@]" -g '*.(automount|device|mount|path|service|socket|swap|target|timer)'
}
PK 쥐\� &J�< �< site-functions/_systemctlnu �[��� #compdef systemctl
# SPDX-License-Identifier: LGPL-2.1+
(( $+functions[_systemctl_command] )) || _systemctl_command()
{
local -a _systemctl_cmds
_systemctl_cmds=(
"list-sockets:List sockets"
"list-timers:List timers"
"list-units:List units"
"start:Start (activate) one or more units"
"stop:Stop (deactivate) one or more units"
"reload:Reload one or more units"
"restart:Start or restart one or more units"
"condrestart:Restart one or more units if active"
"try-restart:Restart one or more units if active"
"reload-or-restart:Reload one or more units if possible, otherwise start or restart"
"force-reload:Reload one or more units if possible, otherwise restart if active"
"hibernate:Hibernate the system"
"hybrid-sleep:Hibernate and suspend the system"
"suspend-then-hibernate:Suspend the system for a period of time, and then hibernate it"
"try-reload-or-restart:Reload one or more units if possible, otherwise restart if active"
"isolate:Start one unit and stop all others"
"kill:Send signal to processes of a unit"
"is-active:Check whether units are active"
"is-failed:Check whether units are failed"
"status:Show runtime status of one or more units"
"show:Show properties of one or more units/jobs or the manager"
"cat:Show the source unit files and drop-ins"
"reset-failed:Reset failed state for all, one, or more units"
"list-unit-files:List installed unit files"
"enable:Enable one or more unit files"
"disable:Disable one or more unit files"
"add-wants:Add Wants= dependencies to a unit"
"add-requires:Add Requires= dependencies to a unit"
"reenable:Reenable one or more unit files"
"preset:Enable/disable one or more unit files based on preset configuration"
"set-default:Set the default target"
"get-default:Query the default target"
"edit:Edit one or more unit files"
"is-system-running:Query overall status of the system"
"help:Show documentation for specified units"
"list-dependencies:Show unit dependency tree"
"mask:Mask one or more units"
"unmask:Unmask one or more units"
"link:Link one or more units files into the search path"
"is-enabled:Check whether unit files are enabled"
"list-jobs:List jobs"
"cancel:Cancel all, one, or more jobs"
"show-environment:Dump environment"
"set-environment:Set one or more environment variables"
"unset-environment:Unset one or more environment variables"
"daemon-reload:Reload systemd manager configuration"
"daemon-reexec:Reexecute systemd manager"
"default:Enter system default mode"
"rescue:Enter system rescue mode"
"emergency:Enter system emergency mode"
"halt:Shut down and halt the system"
"suspend:Suspend the system"
"poweroff:Shut down and power-off the system"
"reboot:Shut down and reboot the system"
"kexec:Shut down and reboot the system with kexec"
"exit:Ask for user instance termination"
"switch-root:Change root directory"
"revert:Revert unit files to their vendor versions"
)
if (( CURRENT == 1 )); then
_describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
else
local curcontext="$curcontext" expl
cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
# Deal with any aliases
case $cmd in
condrestart) cmd="try-restart";;
force-reload) cmd="try-reload-or-restart";;
esac
if (( $#cmd )); then
curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
local update_policy
zstyle -s ":completion:${curcontext}:" cache-policy update_policy
if [[ -z "$update_policy" ]]; then
zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
fi
_call_function ret _systemctl_$cmd || _message 'no more arguments'
else
_message "unknown systemctl command: $words[1]"
fi
return ret
fi
}
__systemctl()
{
systemctl $_sys_service_mgr --full --no-legend --no-pager "$@" 2>/dev/null
}
# Fills the unit list
_systemctl_all_units()
{
if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS$_sys_service_mgr ) ||
! _retrieve_cache SYS_ALL_UNITS$_sys_service_mgr;
then
_sys_all_units=( ${${(f)"$(__systemctl list-units --all "$PREFIX*" )"}%% *} )
_store_cache SYS_ALL_UNITS$_sys_service_mgr _sys_all_units
fi
}
# Fills the unit list including all file units
_systemctl_really_all_units()
{
local -a all_unit_files;
local -a really_all_units;
if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS$_sys_service_mgr ) ||
! _retrieve_cache SYS_REALLY_ALL_UNITS$_sys_service_mgr;
then
all_unit_files=( ${${(f)"$(__systemctl list-unit-files "$PREFIX*" )"}%% *} )
_systemctl_all_units
really_all_units=($_sys_all_units $all_unit_files)
_sys_really_all_units=(${(u)really_all_units})
_store_cache SYS_REALLY_ALL_UNITS$_sys_service_mgr _sys_really_all_units
fi
}
_filter_units_by_property() {
local property=$1 value=$2; shift 2
local -a units; units=("${(q-)@}")
local -A props
props=(${(f)"$(_call_program units "$service $_sys_service_mgr show --no-pager --property=\"Id,$property\" -- ${units} 2>/dev/null")"})
echo -E - "${(@g:o:)${(k@)props[(Re)$property=$value]}#Id=}"
}
_systemctl_get_non_template_names() { echo -E - ${^${(R)${(f)"$(
__systemctl $mode list-unit-files "$PREFIX*"
__systemctl $mode list-units --all "$PREFIX*"
)"}:#*@.*}%%[[:space:]]*} }
_systemctl_get_template_names() { echo -E - ${^${(M)${(f)"$(__systemctl list-unit-files "$PREFIX*" )"}##*@.[^[:space:]]##}%%@.*}@ }
_systemctl_active_units() {_sys_active_units=( ${${(f)"$(__systemctl list-units "$PREFIX*" )"}%% *} )}
_systemctl_startable_units(){
_sys_startable_units=( $( _filter_units_by_property ActiveState inactive $(
_filter_units_by_property CanStart yes ${${${(f)"$(
__systemctl $mode list-unit-files --state enabled,enabled-runtime,linked,linked-runtime,static,indirect,disabled,generated,transient "$PREFIX*"
__systemctl $mode list-units --state inactive,failed "$PREFIX*"
)"}:#*@.*}%%[[:space:]]*}
)) )
}
_systemctl_restartable_units(){
_sys_restartable_units=( $( _filter_units_by_property CanStart yes ${${${(f)"$(
__systemctl $mode list-unit-files --state enabled,disabled,static "$PREFIX*"
__systemctl $mode list-units "$PREFIX*"
)"}:#*@.*}%%[[:space:]]*} ) )
}
_systemctl_failed_units() {_sys_failed_units=( ${${(f)"$(__systemctl list-units --state=failed "$PREFIX*" )"}%% *} ) }
_systemctl_unit_state() { typeset -gA _sys_unit_state; _sys_unit_state=( $(__systemctl list-unit-files "$PREFIX*" ) ) }
local fun
# Completion functions for ALL_UNITS
for fun in cat mask ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_really_all_units
_wanted systemd-units expl unit \
compadd "$@" -a - _sys_really_all_units
}
done
# Completion functions for NONTEMPLATE_UNITS
for fun in is-active is-failed is-enabled status show preset help list-dependencies edit revert add-wants add-requires ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_wanted systemd-units expl unit \
compadd "$@" - $(_systemctl_get_non_template_names)
}
done
# Completion functions for ENABLED_UNITS
(( $+functions[_systemctl_disable] )) || _systemctl_disable()
{
local _sys_unit_state; _systemctl_unit_state
_wanted systemd-units expl 'enabled unit' \
compadd "$@" - ${(k)_sys_unit_state[(R)enabled]}
}
(( $+functions[_systemctl_reenable] )) || _systemctl_reenable()
{
local _sys_unit_state; _systemctl_unit_state
_wanted systemd-units expl 'enabled/disabled unit' \
compadd "$@" - ${(k)_sys_unit_state[(R)(enabled|disabled)]} $(_systemctl_get_template_names)
}
# Completion functions for DISABLED_UNITS
(( $+functions[_systemctl_enable] )) || _systemctl_enable()
{
local _sys_unit_state; _systemctl_unit_state
_wanted systemd-units expl 'disabled unit' \
compadd "$@" - ${(k)_sys_unit_state[(R)disabled]} $(_systemctl_get_template_names)
}
# Completion functions for FAILED_UNITS
(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
{
local _sys_failed_units; _systemctl_failed_units
_wanted systemd-units expl 'failed unit' \
compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
}
# Completion functions for STARTABLE_UNITS
(( $+functions[_systemctl_start] )) || _systemctl_start()
{
local _sys_startable_units; _systemctl_startable_units
_wanted systemd-units expl 'startable unit' \
compadd "$@" - ${_sys_startable_units[*]}
}
# Completion functions for STOPPABLE_UNITS
for fun in stop kill try-restart condrestart ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
local _sys_active_units; _systemctl_active_units
_wanted systemd-units expl 'stoppable unit' \
compadd "$@" - $( _filter_units_by_property CanStop yes \
${_sys_active_units[*]} )
}
done
# Completion functions for ISOLATABLE_UNITS
(( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
{
_systemctl_all_units
_wanted systemd-units expl 'isolatable unit' \
compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
${_sys_all_units[*]} )
}
# Completion functions for RELOADABLE_UNITS
for fun in reload try-reload-or-restart force-reload ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
local _sys_active_units; _systemctl_active_units
_wanted systemd-units expl 'reloadable unit' \
compadd "$@" - $( _filter_units_by_property CanReload yes \
${_sys_active_units[*]} )
}
done
# Completion functions for RESTARTABLE_UNITS
for fun in restart reload-or-restart ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
local _sys_restartable_units; _systemctl_restartable_units
_wanted systemd-units expl 'restartable unit' \
compadd "$@" - ${_sys_restartable_units[*]}
}
done
# Completion functions for MASKED_UNITS
(( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
{
local _sys_unit_state; _systemctl_unit_state
_wanted systemd-units expl 'masked unit' \
compadd "$@" - ${(k)_sys_unit_state[(R)masked]} || _message "no masked units found"
}
# Completion functions for JOBS
(( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
{
_wanted systemd-jobs expl job \
compadd "$@" - ${${(f)"$(__systemctl list-jobs)"}%% *} ||
_message "no jobs found"
}
# Completion functions for TARGETS
(( $+functions[_systemctl_set-default] )) || _systemctl_set-default()
{
_wanted systemd-targets expl target \
compadd "$@" - ${${(f)"$(__systemctl list-unit-files --type target --all "$PREFIX*" )"}%% *} ||
_message "no targets found"
}
# Completion functions for ENVS
for fun in set-environment unset-environment ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
local fun=$0 ; fun=${fun##_systemctl_}
local suf
if [[ "${fun}" = "set-environment" ]]; then
suf='-S='
fi
_wanted systemd-environment expl 'environment variable' \
compadd "$@" ${suf} - ${${(f)"$(systemctl show-environment)"}%%=*}
}
done
(( $+functions[_systemctl_link] )) || _systemctl_link() {
_sd_unit_files
}
(( $+functions[_systemctl_switch-root] )) || _systemctl_switch-root() {
_files
}
# no systemctl completion for:
# [STANDALONE]='daemon-reexec daemon-reload default
# emergency exit halt kexec list-jobs list-units
# list-unit-files poweroff reboot rescue show-environment'
_systemctl_caching_policy()
{
local _sysunits
local -a oldcache
# rebuild if cache is more than a day old
oldcache=( "$1"(mh+1) )
(( $#oldcache )) && return 0
_sysunits=(${${(f)"$(__systemctl --all)"}%% *})
if (( $#_sysunits )); then
for unit in $_sysunits; do
[[ "$unit" -nt "$1" ]] && return 0
done
fi
return 1
}
_unit_states() {
local -a _states
_states=("${(fo)$(__systemctl --state=help)}")
_values -s , "${_states[@]}"
}
_unit_types() {
local -a _types
_types=("${(fo)$(__systemctl -t help)}")
_values -s , "${_types[@]}"
}
_unit_properties() {
if ( [[ ${+_sys_all_properties} -eq 0 ]] || _cache_invalid SYS_ALL_PROPERTIES$_sys_service_mgr ) ||
! _retrieve_cache SYS_ALL_PROPERTIES$_sys_service_mgr;
then
_sys_all_properties=( ${${(M)${(f)"$(/usr/lib/systemd/systemd --dump-bus-properties)"}}} )
_store_cache SYS_ALL_PROPERTIES$_sys_service_mgr _sys_all_properties
fi
_values -s , "${_sys_all_properties[@]}"
}
_job_modes() {
local -a _modes
_modes=(fail replace replace-irreversibly isolate ignore-dependencies ignore-requirements flush)
_values -s , "${_modes[@]}"
}
(( $+functions[_systemctl_check_inhibitors] )) ||
_systemctl_check_inhibitors() {
local -a _modes
_modes=(auto yes no)
_values -s , "${_modes[@]}"
}
# Build arguments for "systemctl" to be used in completion.
local -a _modes; _modes=("--user" "--system")
# Use the last mode (they are exclusive and the last one is used).
local _sys_service_mgr=${${words:*_modes}[(R)(${(j.|.)_modes})]}
_arguments -s \
{-h,--help}'[Show help]' \
'--version[Show package version]' \
{-t+,--type=}'[List only units of a particular type]:unit type:_unit_types' \
'--state=[Display units in the specified state]:unit state:_unit_states' \
'--job-mode=[Specify how to deal with other jobs]:mode:_job_modes' \
{-p+,--property=}'[Show only properties by specific name]:unit property:_unit_properties' \
{-a,--all}'[Show all units/properties, including dead/empty ones]' \
'--reverse[Show reverse dependencies]' \
'--after[Show units ordered after]' \
'--before[Show units ordered before]' \
{-l,--full}"[Don't ellipsize unit names on output]" \
'--show-types[When showing sockets, show socket type]' \
'--check-inhibitors[Specify if inhibitors should be checked]:mode:_systemctl_check_inhibitors' \
{-q,--quiet}'[Suppress output]' \
'--no-block[Do not wait until operation finished]' \
'--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
'--no-pager[Do not pipe output into a pager]' \
'--system[Connect to system manager]' \
'--user[Connect to user service manager]' \
"--no-wall[Don't send wall message before halt/power-off/reboot]" \
'--global[Enable/disable/mask unit files globally]' \
"--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
'--no-ask-password[Do not ask for system passwords]' \
'--kill-who=[Who to send signal to]:killwho:(main control all)' \
{-s+,--signal=}'[Which signal to send]:signal:_signals' \
{-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
'--root=[Enable/disable/mask unit files in the specified root directory]:directory:_directories' \
'--runtime[Enable/disable/mask unit files only temporarily until next reboot]' \
{-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
{-P,--privileged}'[Acquire privileges before execution]' \
{-n+,--lines=}'[Journal entries to show]:number of entries' \
{-o+,--output=}'[Change journal output mode]:modes:_sd_outputmodes' \
'--firmware-setup[Tell the firmware to show the setup menu on next boot]' \
'--plain[When used with list-dependencies, print output as a list]' \
'--failed[Show failed units]' \
'*::systemctl command:_systemctl_command'
PK 쥐\�W4� � site-functions/_systemdnu �[��� #compdef systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-detect-virt systemd-machine-id-setup systemd-notify systemd-tty-ask-password-agent
# SPDX-License-Identifier: LGPL-2.1+
local curcontext="$curcontext" state lstate line
case "$service" in
systemd-ask-password)
_arguments \
{-h,--help}'[Show this help]' \
'--icon=[Icon name]:icon name:' \
'--timeout=[Timeout in sec]:timeout (seconds):' \
'--no-tty[Ask question via agent even on TTY]' \
'--accept-cached[Accept cached passwords]' \
'--multiple[List multiple passwords if available]'
;;
systemd-cat)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version.]' \
{-t+,--identifier=}'[Set syslog identifier.]:syslog identifier:' \
{-p+,--priority=}'[Set priority value.]:value:({0..7})' \
'--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
':Message'
;;
systemd-cgls)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--no-pager[Do not pipe output into a pager]' \
{-a,--all}'[Show all groups, including empty]' \
'-k[Include kernel threads in output]' \
':cgroups:(cpuset cpu cpuacct memory devices freezer blkio)'
;;
systemd-cgtop)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Print version and exit]' \
'(-c -m -i -t)-p[Order by path]' \
'(-c -p -m -i)-t[Order by number of tasks]' \
'(-m -p -i -t)-c[Order by CPU load]' \
'(-c -p -i -t)-m[Order by memory load]' \
'(-c -m -p -t)-i[Order by IO load]' \
{-d+,--delay=}'[Specify delay]:delay:' \
{-n+,--iterations=}'[Run for N iterations before exiting]:number of iterations:' \
{-b,--batch}'[Run in batch mode, accepting no input]' \
'--depth=[Maximum traversal depth]:maximum depth:'
;;
systemd-detect-virt)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
{-c,--container}'[Only detect whether we are run in a container]' \
{-v,--vm}'[Only detect whether we are run in a VM]' \
{-q,--quiet}"[Don't output anything, just set return value]"
;;
systemd-machine-id-setup)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]'
;;
systemd-notify)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--ready[Inform the init system about service start-up completion.]' \
'--pid=[Inform the init system about the main PID of the daemon]:daemon main PID:_pids' \
'--status=[Send a free-form status string for the daemon to the init systemd]:status string:' \
'--booted[Returns 0 if the system was booted up with systemd]'
;;
systemd-tty-ask-password-agent)
_arguments \
{-h,--help}'[Prints a short help text and exits.]' \
'--version[Prints a short version string and exits.]' \
'--list[Lists all currently pending system password requests.]' \
'--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
'--watch[Continuously process password requests.]' \
'--wall[Forward password requests to wall(1).]' \
'--plymouth[Ask question with plymouth(8).]' \
'--console[Ask question on /dev/console.]'
;;
*) _message 'eh?' ;;
esac
#vim: set ft=zsh sw=4 ts=4 et
PK 쥐\�v�� � site-functions/_systemd-analyzenu �[��� #compdef systemd-analyze
# SPDX-License-Identifier: LGPL-2.1+
_systemd_analyze_log-level() {
local -a _levels
_levels=(debug info notice warning err crit alert emerg)
_describe -t level 'logging level' _levels || compadd "$@"
}
_systemd_analyze_log-target() {
local -a _targets
_targets=(console journal kmsg journal-or-kmsg null)
_describe -t target 'logging target' _targets || compadd "$@"
}
_systemd_analyze_verify() {
_sd_unit_files
}
_systemd_analyze_service-watchdogs() {
local -a _states
_states=(on off)
_describe -t state 'state' _states || compadd "$@"
}
_systemd_analyze_command(){
local -a _systemd_analyze_cmds
# Descriptions taken from systemd-analyze --help.
_systemd_analyze_cmds=(
'time:Print time spent in the kernel before reaching userspace'
'blame:Print list of running units ordered by time to init'
'critical-chain:Print a tree of the time critical chain of units'
'plot:Output SVG graphic showing service initialization'
'dot:Dump dependency graph (in dot(1) format)'
'dump:Dump server status'
'unit-paths:List unit load paths'
'log-level:Get/set systemd log threshold'
'log-target:Get/set systemd log target'
'service-watchdogs:Get/set service watchdog status'
'syscall-filter:List syscalls in seccomp filter'
'verify:Check unit files for correctness'
'calendar:Validate repetitive calendar time events'
)
if (( CURRENT == 1 )); then
_describe "options" _systemd_analyze_cmds
else
local curcontext="$curcontext"
cmd="${${_systemd_analyze_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
if (( $+functions[_systemd_analyze_$cmd] )) && (( CURRENT == 2 )); then
_systemd_analyze_$cmd
else
_message "no more options"
fi
else
_message "unknown systemd-analyze command: $words[1]"
fi
fi
}
_arguments \
{-h,--help}'[Show help text]' \
'--version[Show package version]' \
'--system[Operate on system systemd instance]' \
'--user[Operate on user systemd instance]' \
'--global[Show global user instance config]' \
'--no-pager[Do not pipe output into a pager]' \
'--man=[Do (not) check for existence of man pages]:boolean:(1 0)' \
'--order[When generating graph for dot, show only order]' \
'--require[When generating graph for dot, show only requirement]' \
'--fuzz=[When printing the tree of the critical chain, print also services, which finished TIMESPAN earlier, than the latest in the branch]:TIMESPAN' \
'--from-pattern=[When generating a dependency graph, filter only origins]:GLOB' \
'--to-pattern=[When generating a dependency graph, filter only destinations]:GLOB' \
{-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
{-M+,--machine=}'[Operate on local container]:machine:_sd_machines' \
'*::systemd-analyze commands:_systemd_analyze_command'
PK 쥐\�M��4 4 site-functions/_systemd-deltanu �[��� #compdef systemd-delta
# SPDX-License-Identifier: LGPL-2.1+
_delta_type() {
local -a _delta_types
_delta_types=(masked equivalent redirected overridden unchanged)
_values -s , "${_delta_types[@]}"
}
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--no-pager[Do not pipe output into a pager]' \
'--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
{-t+,--type=}'[Only display a selected set of override types]:types:_delta_type' \
':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
PK 쥐\K�g% % site-functions/_systemd-inhibitnu �[��� #compdef systemd-inhibit
# SPDX-License-Identifier: LGPL-2.1+
_systemd_inhibit_command(){
if (( CURRENT == 1 )); then
compset -q
_normal
else
local n=${words[(b:2:i)[^-]*]}
if (( n <= CURRENT )); then
compset -n $n
_alternative \
'files:file:_files' \
'commands:command:_normal' && return 0
fi
_default
fi
}
_inhibit_what() {
local _inhibit
_inhibit=(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)
_values -s : "${_inhibit[@]}"
}
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--what=[Operations to inhibit]:options:_inhibit_what' \
'--who=[A descriptive string who is inhibiting]:who is inhibiting:' \
'--why=[A descriptive string why is being inhibited]:reason for the lock:' \
'--mode=[One of block or delay]:lock mode:( block delay )' \
'--list[List active inhibitors]' \
'*:commands:_systemd_inhibit_command'
PK 쥐\ا� site-functions/_systemd-resolvenu �[��� #compdef systemd-resolve
# SPDX-License-Identifier: LGPL-2.1+
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# systemd is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with systemd; If not, see <http://www.gnu.org/licenses/>.
_dns_protocol() {
local -a _protocol
_protocol=( $(_call_program protocol ${service} --legend=no --protocol help; echo help) )
_values 'protocol' "$_protocol[@]"
}
_dns_type() {
local -a _type
_type=( $(_call_program type ${service} --legend=no --type help; echo help) )
_values 'type' "$_type[@]"
}
_dns_class() {
local -a _class
_class=( $(_call_program class ${service} --legend=no --class help; echo help) )
_values 'class' "$_class[@]"
}
_systemd-resolve_none() {
_alternative : \
'domain:DNS address:' \
'address:email address:'
}
_arguments \
{-h,--help}'[Print a short help text and exit]' \
'--version[Print a short version string and exit]' \
'--legend=no[Do not show headers and footers]' \
'-4[Resolve IPv4 addresses]' \
'-6[Resolve IPv6 addresses]' \
{-i+,--interface=}'[Look on interface]:interface:_net_interfaces' \
{-p+,--protocol=}'[Look via protocol]:protocol:_dns_protocol' \
{-t+,--type=}'[Query RR with DNS type]:type:_dns_type' \
{-c+,--class=}'[Query RR with DNS class]:class:_dns_class' \
'--service[Resolve services]' \
'--service-address=no[Do not resolve address for services]' \
'--service-txt=no[Do not resolve TXT records for services]' \
'--openpgp[Query OpenPGP public key]' \
'--tlsa[Query TLS public key]' \
'--cname=no[Do not follow CNAME redirects]' \
'--search=no[Do not use search domains]' \
'--statistics[Show resolver statistics]' \
'--reset-statistics[Reset resolver statistics]' \
'*::default: _systemd-resolve_none'
PK 쥐\NJ8j@ @ site-functions/_systemd-runnu �[��� #compdef systemd-run
# SPDX-License-Identifier: LGPL-2.1+
__systemctl() {
local -a _modes
_modes=("--user" "--system")
systemctl ${words:*_modes} --full --no-legend --no-pager "$@" 2>/dev/null
}
__get_slices () {
__systemctl list-units --all -t slice \
| { while read -r a b; do echo $a; done; };
}
__slices () {
local -a _slices
_slices=(${(fo)"$(__get_slices)"})
typeset -U _slices
_describe 'slices' _slices
}
_arguments \
{-h,--help}'[Show help message]' \
'--version[Show package version]' \
'--user[Run as user unit]' \
{-H+,--host=}'[Operate on remote host]:[user@]host:_sd_hosts_or_user_at_host' \
{-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
'--scope[Run this as scope rather than service]' \
'--unit=[Run under the specified unit name]:unit name' \
{-p+,--property=}'[Set unit property]:NAME=VALUE:(( \
CPUAccounting= MemoryAccounting= BlockIOAccounting= SendSIGHUP= \
SendSIGKILL= MemoryLimit= CPUShares= BlockIOWeight= User= Group= \
DevicePolicy= KillMode= DeviceAllow= BlockIOReadBandwidth= \
BlockIOWriteBandwidth= BlockIODeviceWeight= Nice= Environment= \
KillSignal= LimitCPU= LimitFSIZE= LimitDATA= LimitSTACK= \
LimitCORE= LimitRSS= LimitNOFILE= LimitAS= LimitNPROC= \
LimitMEMLOCK= LimitLOCKS= LimitSIGPENDING= LimitMSGQUEUE= \
LimitNICE= LimitRTPRIO= LimitRTTIME= PrivateTmp= PrivateDevices= \
PrivateNetwork= NoNewPrivileges= WorkingDirectory= RootDirectory= \
TTYPath= SyslogIdentifier= SyslogLevelPrefix= SyslogLevel= \
SyslogFacility= TimerSlackNSec= OOMScoreAdjust= ReadWritePaths= \
ReadOnlyPaths= InaccessiblePaths= EnvironmentFile= \
ProtectSystem= ProtectHome= RuntimeDirectory= PassEnvironment= \
))' \
'--description=[Description for unit]:description' \
'--slice=[Run in the specified slice]:slices:__slices' \
{-r,--remain-after-exit}'[Leave service around until explicitly stopped]' \
'--send-sighup[Send SIGHUP when terminating]' \
'--service-type=[Service type]:type:(simple forking oneshot dbus notify idle)' \
'--uid=[Run as system user]:user:_users' \
'--gid=[Run as system group]:group:_groups' \
'--nice=[Nice level]:nice level' \
'--setenv=[Set environment]:NAME=VALUE' \
'--on-active=[Run after SEC seconds]:SEC' \
'--on-boot=[Run SEC seconds after machine was booted up]:SEC' \
'--on-startup=[Run SEC seconds after systemd was first started]:SEC' \
'--on-unit-active=[Run SEC seconds after the last activation]:SEC' \
'--on-unit-inactive=[Run SEC seconds after the last deactivation]:SEC' \
'--on-calendar=[Realtime timer]:SPEC' \
'--timer-property=[Set timer unit property]:NAME=VALUE' \
'--wait=[Wait until service stopped again]' \
'*::command:_command'
PK 쥐\
#Ƽ� � site-functions/_systemd-tmpfilesnu �[��� #compdef systemd-tmpfiles
# SPDX-License-Identifier: LGPL-2.1+
_arguments \
{-h,--help}'[Show help]' \
'--version[Show package version]' \
'--create[Create, set ownership/permissions based on the config files.]' \
'--clean[Clean up all files and directories with an age parameter configured.]' \
'--remove[All files and directories marked with r, R in the configuration files are removed.]' \
'--boot[Execute actions only safe at boot]' \
'--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
'--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
'--root=[Operate on an alternate filesystem root]:directory:_directories' \
'*::files:_files'
PK 쥐\�Wt� � site-functions/_timedatectlnu �[��� #compdef timedatectl
# SPDX-License-Identifier: LGPL-2.1+
_timedatectl_set-timezone(){
local -a _timezones
_timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
compadd "$_timezones[@]"
}
_timedatectl_set-time(){
_message "YYYY-MM-DD HH:MM:SS"
}
_timedatectl_set-local-rtc(){
local -a _options
_options=(
'0:Maintain RTC in universal time'
'1:Maintain RTC in local time'
)
_describe options _options
}
_timedatectl_set-ntp(){
local -a _options
_options=(
'0:Disable NTP based network time configuration'
'1:Enable NTP based network time configuration'
)
_describe options _options
}
_timedatectl_command(){
local -a _timedatectl_cmds
_timedatectl_cmds=(
'status:Show current time settings'
'set-time:Set system time'
'set-timezone:Set system timezone'
'list-timezones:Show known timezones'
'set-local-rtc:Control whether RTC is in local time'
'set-ntp:Control whether NTP is enabled'
)
if (( CURRENT == 1 )); then
_describe -t commands 'timedatectl command' _timedatectl_cmds
else
local curcontext="$curcontext"
cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
if (( $+functions[_timedatectl_$cmd] )); then
_timedatectl_$cmd
else
_message "no more options"
fi
else
_message "unknown timedatectl command: $words[1]"
fi
fi
}
_arguments -s \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not prompt for password]' \
{-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
{-M+,--machine=}'[Operate on local container]:machines:_sd_machines' \
'*::timedatectl commands:_timedatectl_command'
PK 쥐\�ZHM M site-functions/_bootctlnu �[��� #compdef bootctl
# SPDX-License-Identifier: LGPL-2.1+
(( $+functions[_bootctl_command] )) || _bootctl_command()
{
local -a _bootctl_cmds
_bootctl_cmds=(
"status:Show status of installed systemd-boot and EFI variables"
"install:Install systemd-boot to the ESP and EFI variables"
"update:Update systemd-boot in the ESP and EFI variables"
"remove:Remove systemd-boot from the ESP and EFI variables"
)
if (( CURRENT == 1 )); then
_describe -t commands 'bootctl command' _bootctl_cmds || compadd "$@"
else
local curcontext="$curcontext"
cmd="${${_bootctl_cmds[(r)$words[1]:*]%%:*}}"
if (( $+functions[_bootctl_$cmd] )); then
_bootctl_$cmd
else
_message "no more options"
fi
fi
}
_arguments \
{-h,--help}'[Prints a short help text and exits.]' \
'--version[Prints a short version string and exits.]' \
'--path=[Path to the EFI System Partition (ESP)]:path:_directories' \
'--no-variables[Do not touch EFI variables]' \
'*::bootctl command:_bootctl_command'
PK 쥐\�dU4� � site-functions/_kernel-installnu �[��� #compdef kernel-install
# SPDX-License-Identifier: LGPL-2.1+
_images(){
if [[ "$words[2]" == "remove" ]]; then
_message 'No more options'
else
_path_files -W /boot/ -P /boot/ -g "vmlinuz-*"
fi
}
_kernels(){
read _MACHINE_ID < /etc/machine-id
_kernel=( /lib/modules/[0-9]* )
if [[ "$cmd" == "remove" && -n "$_MACHINE_ID" ]]; then
_kernel=( "/boot/$_MACHINE_ID"/[0-9]* )
fi
_kernel=( ${_kernel##*/} )
_describe "installed kernels" _kernel
}
_arguments \
'1::add or remove:(add remove)' \
'2::kernel versions:_kernels' \
'3::kernel images:_images'
#vim: set ft=zsh sw=4 ts=4 et
PK 쥐\ �Em m site-functions/_udevadmnu �[��� #compdef udevadm
# SPDX-License-Identifier: LGPL-2.1+
_udevadm_info(){
_arguments \
'--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
'--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
'--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
'--root[Print absolute paths in name or symlink query.]' \
'--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
'--export[Print output as key/value pairs.]' \
'--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
'--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
'--export-db[Export the content of the udev database.]' \
'--cleanup-db[Cleanup the udev database.]'
}
_udevadm_trigger(){
_arguments \
'--verbose[Print the list of devices which will be triggered.]' \
'--dry-run[Do not actually trigger the event.]' \
'--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
'--action=[Type of event to be triggered.]:actions:(add change remove)' \
'--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
'--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
'--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
'--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
'--property-match=[Trigger events for devices with a matching property value.]' \
'--tag-match=property[Trigger events for devices with a matching tag.]' \
'--sysname-match=[Trigger events for devices with a matching sys device name.]' \
'--parent-match=[Trigger events for all children of a given device.]'
}
_udevadm_settle(){
_arguments \
'--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
'--seq-start=[Wait only for events after the given sequence number.]' \
'--seq-end=[Wait only for events before the given sequence number.]' \
'--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
'--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
'--help[Print help text.]'
}
_udevadm_control(){
_arguments \
'--exit[Signal and wait for systemd-udevd to exit.]' \
'--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
'--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
'--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
'--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
'--property=[Set a global property for all events.]' \
'--children-max=[Set the maximum number of events.]' \
'--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
'--help[Print help text.]'
}
_udevadm_monitor(){
_arguments \
'--kernel[Print the kernel uevents.]' \
'--udev[Print the udev event after the rule processing.]' \
'--property[Also print the properties of the event.]' \
'--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
'--tag-match=[Filter events by property.]' \
'--help[Print help text.]'
}
_udevadm_test(){
_arguments \
'--action=[The action string.]:actions:(add change remove)' \
'--subsystem=[The subsystem string.]' \
'--help[Print help text.]' \
'*::devpath:_files -P /sys/ -W /sys'
}
_udevadm_test-builtin(){
if (( CURRENT == 2 )); then
_arguments \
'--help[Print help text]' \
'*::builtins:(blkid btrfs hwdb input_id net_id net_setup_link kmod path_id usb_id uaccess)'
elif (( CURRENT == 3 )); then
_arguments \
'--help[Print help text]' \
'*::syspath:_files -P /sys -W /sys'
else
_arguments \
'--help[Print help text]'
fi
}
_udevadm_mounts(){
local dev_tmp dpath_tmp mp_tmp mline
tmp=( "${(@f)$(< /proc/self/mounts)}" )
dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
local MATCH
mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
dev_tmp=( "${(@q)dev_tmp:#/*}" )
_alternative \
'device-paths: device path:compadd -a dpath_tmp' \
'directories:mount point:compadd -a mp_tmp'
}
_udevadm_command(){
local -a _udevadm_cmds
_udevadm_cmds=(
'info:query sysfs or the udev database'
'trigger:request events from the kernel'
'settle:wait for the event queue to finish'
'control:control the udev daemon'
'monitor:listen to kernel and udev events'
'test:test an event run'
'test-builtin:test a built-in command'
)
if ((CURRENT == 1)); then
_describe -t commands 'udevadm commands' _udevadm_cmds
else
local curcontext="$curcontext"
cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
if (($#cmd)); then
if (( $+functions[_udevadm_$cmd] )); then
_udevadm_$cmd
else
_message "no options for $cmd"
fi
else
_message "no more options"
fi
fi
}
_arguments \
'--debug[Print debug messages to stderr]' \
'--version[Print version number]' \
'--help[Print help text]' \
'*::udevadm commands:_udevadm_command'
PK 쥐\��qluJ uJ site-functions/_firewalldnu �[��� #compdef firewall-cmd firewall-offline-cmd
local curcontext="$curcontext" name nm="$compstate[nmatches]"
local -a state line expl direct args auxargs opargs suf
typeset -A opt_args
direct=(
'--get-all-chains[get all chains]'
'--get-chains[get all chains added to the table]:family:(ipv4 ipv6 eb):table:->tables'
'--add-chain[add a new chain to the table]:family:(ipv4 ipv6 eb):table:->tables:new chain'
'--remove-chain[remove a chain from the table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains'
'--query-chain[return whether the chain has been added to the table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains'
'--get-all-rules[get all rules]'
'--get-rules[get all rules added to chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains'
'--add-rule[add rule to chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains:priority: :*:argument'
'--remove-rule[remove rule with priority from chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain:->chains:priority: :*:argument'
'--remove-rules[remove rules from chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain->chains'
'--query-rule[chain in table]:family:(ipv4 ipv6 eb):table:->tables:chain: :priority: :*:argument'
'--get-all-passthroughs[get all tracked passthrough rules]'
'--get-passthroughs[get tracked passthrough rules]:family:(ipv4 ipv6 eb):*:: : _iptables'
'--add-passthrough[add a new tracked passthrough rule]:family:(ipv4 ipv6 eb):*:: : _iptables'
'--remove-passthrough[remove a tracked passthrough rule]:family:(ipv4 ipv6 eb):*:: : _iptables'
'--query-passthrough[return whether the tracked passthrough rule has been added]:family:(ipv4 ipv6 eb):*:: : _iptables'
)
name='--name=[specify new name]:name'
case $service in
firewall-cmd)
direct+=(
'--passthrough[pass a command through (untracked by firewalld)]:family:(ipv4 ipv6 eb):*:: : _iptables'
)
args=(
'(--timeout)--permanent[set an option permanently]'
)
auxargs=(
'(--permanent)--timeout=[specify time for rule to be active]:time value (seconds)'
)
opargs=(
'(aux --permanent --zone)--state[print firewalld state]'
'(aux --permanent --zone)--reload[reload firewall and keep state information]'
'(aux --permanent --zone)--complete-reload[reload firewall and lose state information]'
'(aux --permanent --zone)--runtime-to-permanent[create permanent from runtime configuration]'
'(aux --permanent --zone -q --quiet)--get-active-zones[print currently active zones]'
'*--remove-service=[remove a service from a zone]:service:->services'
'(aux --permanent --zone)--panic-on[enable panic mode]'
'(aux --permanent --zone)--panic-off[disable panic mode]'
'(aux --permanent --zone)--query-panic[query whether panic mode is enabled]'
)
;;
firewall-offline-cmd)
args=(
'--system-config[specify path to firewalld system configuration]:path:_directories'
'--default-config[specify path to firewalld default configuration]:path:_directories'
'--migrate-system-config-firewall=[import configuration data from the given configuration file]:file:_files'
'--disabled[disable the firewall by disabling the firewalld service]' '!(--disabled)--enabled'
'!--'{add,remove}'module=:iptables module' '!--custom-rules=:type:table:filename (ignored'
\*{-s+,--service=}'[enable a service in the default zone]:service:->services'
'*--remove-service=[disable a service in the default zone]:service:->services'
\*{-p+,--port=}'[enable a port in the default zone]:port:->ports'
\*{-t+,--trust=}'[bind an interface to the trusted zone]:interface:_net_interfaces'
{-m+,--masq=}'[enable masquerading in the default zone, IPv4 only]:interface (ignored)'
'--forward-port=[add port forward in the default zone]:port forward:->port-forwards'
'--block-icmp=[block this ICMP type in the default zone]:icmp type:->icmp-types'
"--policy-server[change Polkit actions to 'server' (more restricted)]"
"--policy-desktop[change Polkit actions to 'desktop' (less restricted)]"
)
opargs=(
'*--remove-service-from-zone[remove a service from a zone]:service:->services'
)
;;
esac
# option ordering doesn't matter but listing fewer options makes
# completion more useful:
(( $words[(I)--direct] )) || direct=( \!$^direct ) # only list direct options after --direct
(( $words[(I)--new-*-from-file*] )) || name="!$name" # also check for required options before listing --name
_arguments -C -s $args $direct \
'!(-q --quiet)'{-v,--verbose} \
'(-q --quiet --list-all --list-all-zones --list-lockdown-whitelist-commands --list-lockdown-whitelist-contexts --list-lockdown-whitelist-uids --list-lockdown-whitelist-users --list-services --list-ports --list-protocols --list-icmp-blocks --list-forward-ports --list-rich-rules --list-interfaces --list-sources --get-default-zone --get-active-zones --get-zone-of-interface --get-zone-of-source --get-zones --get-services --get-icmptypes --get-target --info-zone --info-icmptype --info-service --info-ipset --get-ipsets --get-entries --info-helper --get-helpers --get-destinations --get-description --version -h --help)'{-q,--quiet}"[don't print status messages]" \
'*--zone=[use this zone to set or query options, else default zone]:zone:->zones' \
+ aux \
$auxargs $name \
'*--option=[specify option]:option (key=value)' \
'--type=[specify ipset type]:ipset type:->ipset-types' \
'--ipset=[specify ipset]:ipset:->ipsets' \
'--icmptype=[specify icmp type]:icmp type:->icmp-types' \
'--service=[specify service]:service:->services' \
'--helper=[specify helper]:helper:->helpers' \
'--family=[specify family]:family:(ipv4 ipv6)' \
'--module=[specify module]:module' \
+ '(op)' \
$opargs \
'(aux -)'{-h,--help}'[display usage information]' \
'(aux -)'{-V,--version}'[display version information]' \
'(aux --permanent --zone)--get-log-denied[print the log denied value]' \
'(aux --permanent --zone)--set-log-denied=[set log denied value]:value:(all unicast broadcast multicast off)' \
'(aux --permanent --zone)--get-automatic-helpers[print the automatic helpers value]' \
'(aux --permanent --zone)--set-automatic-helpers=[set automatic helpers value]:value:(yes no system)' \
'(aux --permanent --zone -q --quiet)--get-default-zone[print default zone for connections and interfaces]' \
'(aux --permanent --zone)--set-default-zone=[set default zone]:zone:->zones' \
'(--zone -q --quiet)--get-zones[print predefined zones]' \
'(--zone -q --quiet)--get-services[print predefined services]' \
'(--zone -q --quiet)--get-icmptypes[print predefined icmptypes]' \
'(-q --quiet)*--get-zone-of-interface=[print name of the zone the interface is bound to]:interface:_net_interfaces' \
'(-q --quiet)*--get-zone-of-source=[print name of the zone a source is bound to]:source' \
'(-q --quiet)--list-all-zones[list everything added for or enabled in all zones]' \
'--new-zone=[add a new zone]:zone:->zones' \
'--new-zone-from-file=[add a new zone from file with optional name]:filename:_files' \
'--delete-zone=[delete an existing zone]:zone:->zones' \
'--load-zone-defaults=[load zone default settings]:zone:->zones' \
'(-q --quiet)--get-target[get the zone target]' \
'--set-target=[set the zone target]:target:(default ACCEPT DROP REJECT)' \
'(-q --quiet)--info-zone=[print information about a zone]:zone:->zones' \
'--path-zone=[print file path of a zone]:zone:->zones' \
'(aux --permanent --zone)--get-ipset-types[print the supported ipset types]' \
'--new-ipset=[add a new ipset]:ipset:->ipsets' \
'--new-ipset-from-file=[add a new ipset from file with optional name]:filename:_files' \
'--delete-ipset=[delete an existing ipset]:ipset:->ipsets' \
'--load-ipset-defaults=[load ipset default settings]:ipset:->ipsets' \
'(-q --quiet)--info-ipset=[print information about an ipset]:ipset' \
'--path-ipset=[print file path of an ipset]:ipset' \
'(aux --permanent --zone -q --quiet)--get-ipsets[print predefined ipsets]' \
'--set-description=[set new description]:description' \
'(-q --quiet)--get-description[print description]' \
'--set-short=[set new short description]:description' \
'--get-short[print short description]' \
'*--add-entry=[add a new entry to an ipset]:entry' \
'*--remove-entry=[remove an entry from an ipset]:entry' \
'*--query-entry=[return whether ipset has an entry]:entry' \
'(-q --quiet)--get-entries[list entries of an ipset]' \
'*--add-entries-from-file=[add a new entries to an ipset]:entry' \
'--remove-entries-from-file=[remove entries from an ipset]:entry' \
'--new-icmptype=[add a new icmptype]:icmp type:->icmp-types' \
'--new-icmptype-from-file=[add a new icmptype from file with optional name]:file:_files' \
'--delete-icmptype=[delete an existing icmptype]:icmp type:->icmp-types' \
'--load-icmptype-defaults=[load icmptype default settings]:icmp type:->icmp-types' \
'(-q --quiet)--info-icmptype=[print information about an icmptype]:icmp type:->icmp-types' \
'--path-icmptype=[print file path of an icmptype]:icmp type:->icmp-types' \
'*--add-destination=[enable destination for ipv in icmptype]:destination:->destinations' \
'*--remove-destination=[disable destination for ipv in service or icmp-type]:destination:->destinations' \
'(-q --quiet)--get-destinations[list destinations]' \
'--new-service=[add a new service]:service' \
'--new-service-from-file=[add a new service from file with optional name]:file:_files' \
'--delete-service=[delete an existing service]:service:->services' \
'--load-service-defaults=[load icmptype default settings]:service:->services' \
'(-q --quiet)--info-service=[print information about a service]:service:->services' \
'--path-service=[print file path of a service]:service:->services' \
'*--add-port=[add a new port to service, zone or helper]:port:->ports' \
'*--remove-port=[remove a port from a service, zone or helper]:port:->ports' \
'*--query-port=[return whether the port has been added for service, zone or helper]:port:->ports' \
'--get-ports[list ports of service or helper]' \
'*--add-protocol=[add a new protocol to service or zone]:protocol' \
'*--remove-protocol=[remove a protocol from service or zone]:protocol' \
'*--query-protocol=[return whether the protocol has been added for service or zone]:protocol' \
'--get-protocols[list protocols of service]' \
'*--add-source-port=[add a new source port to service or zone]:port:->ports' \
'*--remove-source-port=[remove a source port from service or zone]:port:->ports' \
'*--query-source-port=[return whether the source port has been added for service or zone]:port:->ports' \
'--get-source-ports[list source ports of service]' \
'*--add-module=[add a new module to service]:module' \
'*--remove-module=[remove a module from service]:module' \
'*--query-module=[return whether the module has been added for service]:module' \
'--get-modules[list modules of service]' \
'*--set-destination=[set destination for ipv to address in service]:destination:->destinations' \
'--query-destination=[return whether destination ipv is set for service or enabled for icmptype]:destination:->destinations' \
'(-q --quiet)--list-all[list everything added for or enabled in a zone]' \
'(-q --quiet)--list-services[list services added for a zone]' \
'*--add-service=[add a service for a zone]:service:->services' \
'*--query-service=[return whether service has been added for a zone]:service:->services' \
'(-q --quiet)--list-ports[list ports added for a zone]' \
'(-q --quiet)--list-protocols[list protocols added for a zone]' \
'--list-source-ports[list source ports added for a zone]' \
'(-q --quiet)--list-icmp-blocks[list Internet ICMP type blocks added for a zone]' \
'*--add-icmp-block=[add an ICMP block for a zone]:icmp type:->icmp-types' \
'*--remove-icmp-block=[remove the ICMP block from a zone]:icmp type:->icmp-types' \
'*--query-icmp-block=[return whether an ICMP block has been added for a zone]:icmp type:->icmp-types' \
'--add-icmp-block-inversion[enable inversion of icmp blocks for a zone]' \
'--remove-icmp-block-inversion[disable inversion of icmp blocks for a zone]' \
'--query-icmp-block-inversion[return whether inversion of icmp blocks has been enabled for a zone]' \
'(-q --quiet)--list-forward-ports[list IPv4 forward ports added for a zone]' \
'*--add-forward-port=[add the IPv4 forward port for a zone]: :->port-forwards' \
'*--remove-forward-port=[remove the IPv4 forward port from a zone]: :->port-forwards' \
'*--query-forward-port=[return whether the IPv4 forward port has been added for a zone]: :->port-forwards' \
'--add-forward[enable forwarding between interfaces and sources in a zone]' \
'--remove-forward[disable forwarding between interfaces and sources in a zone]' \
'--query-forward[return whether forwarding has been enabled for a zone]' \
'--add-masquerade[enable IPv4 masquerade for a zone]' \
'--remove-masquerade[disable IPv4 masquerade for a zone]' \
'--query-masquerade[return whether IPv4 masquerading has been enabled for a zone]' \
'(-q --quiet)--list-rich-rules[list rich language rules added for a zone]' \
'*--add-rich-rule=[add rich language rule for a zone]:rule' \
'*--remove-rich-rule=[remove specified rich language rule from a zone]:rule' \
'*--query-rich-rule=[return whether specified rich language rule has been added for a zone]:rule' \
'(-q --quiet)--list-interfaces[list interfaces that are bound to a zone]' \
'*--add-interface=[bind the specified interface to a zone]:interface:_net_interfaces' \
'*--change-interface=[change zone the specified interface is bound to]:interface:_net_interfaces' \
'*--query-interface=[query whether specified interface is bound to a zone]:interface:_net_interfaces' \
'*--remove-interface=[remove binding of specified interface from a zone]:interface:_net_interfaces' \
'(-q --quiet)--list-sources[list sources that are bound to a zone]' \
'*--add-source=[bind source to a zone]: :->sources' \
'*--change-source=[change zone a source is bound to]: :->sources' \
'*--query-source=[query whether source is bound to a zone]: :->sources' \
'*--remove-source=[remove binding of a source from a zone]: :->sources' \
'--new-helper=[add a new helper]:helper:->helpers' \
'--new-helper-from-file=[add a new helper from file with optional name]:file:_files' \
'--delete-helper=[delete an existing helper]:helper:->helpers' \
'--load-helper-defaults=[load helper default settings]:helper:->helpers' \
'(--zone -q --quiet)--info-helper=[print information about an helper]:helper:->helpers' \
'--path-helper=[print file path of an helper]:helper:->helpers' \
'(--zone -q --quiet)--get-helpers[print predefined helpers]' \
'--set-module=[set module to helper]:module' \
'--get-module[get module from helper]' \
'--set-family=[set family for helper]:family' \
'--get-family[get family from helper]' \
'(aux --permanent --zone)--lockdown-on[enable lockdown]' \
'(aux --permanent --zone)--lockdown-off[disable lockdown]' \
'(aux --permanent --zone)--query-lockdown[query whether lockdown is enabled]' \
'(-q --quiet)--list-lockdown-whitelist-commands[list all command lines that are on the whitelist]' \
'*--add-lockdown-whitelist-command=[add a command to the whitelist]:command:_cmdstring' \
'*--remove-lockdown-whitelist-command=[remove the command from the whitelist]:command' \
'*--query-lockdown-whitelist-command=[query whether a command is on the whitelist]:command' \
'(-q --quiet)--list-lockdown-whitelist-contexts[list all contexts that are on the whitelist]' \
'*--add-lockdown-whitelist-context=[add the specified context to the whitelist]:context' \
'*--remove-lockdown-whitelist-context=[remove a context from the whitelist]:context' \
'*--query-lockdown-whitelist-context=[query whether a context is on the whitelist]:context' \
'(-q --quiet)--list-lockdown-whitelist-uids[list all user ids that are on the whitelist]' \
'*--add-lockdown-whitelist-uid=[add the specified user id to the whitelist]:uid' \
'*--remove-lockdown-whitelist-uid=[remove the specified user id from the whitelist]:uid' \
'*--query-lockdown-whitelist-uid=[query whether a user id is on the whitelist]:uid' \
'(-q --quiet)--list-lockdown-whitelist-users[list all user names that are on the whitelist]' \
'*--add-lockdown-whitelist-user=[add the specified user to the whitelist]:user:_users' \
'*--remove-lockdown-whitelist-user=[remove the specified user from the whitelist]:user:_users' \
'*--query-lockdown-whitelist-user=[query whether the specified user is on the whitelist]:user:_users' \
'--direct[first option for all direct options]'
[[ $state = sources ]] && compset -P 'ipset:' && state=ipsets
case $state in
sources)
_message -e sources "source[/mask]|MAC|ipset:ipset"
;;
chains)
_description chains expl 'chain'
compadd "$expl[@]" - ${${(f)"$(_call_program chains $words[1] ${(k)opt_args[--permanent]} --direct --get-all-chains)"}##* }
;;
destinations)
if compset -P 1 '*:'; then
if compset -P 1 '*/'; then
_message -e masks "mask"
else
_message -e addresses "address"
fi
else
compset -S ':*' || suf=( -qS : )
_description ipvs expl 'ipv'
compadd "$expl[@]" $suf - ipv4 ipv6
fi
;;
helpers)
_description helpers expl 'helper'
compadd "$expl[@]" - $(_call_program helpers $words[1] ${(k)opt_args[--permanent]} --get-helpers)
;;
icmp-types)
_description icmp-types expl 'icmp type'
compadd "$expl[@]" - $(_call_program icmp-types $words[1] --get-icmptypes)
;;
ipsets)
_description ipsets expl 'ipset'
compadd "$expl[@]" - $(_call_program ipsets $words[1] ${(k)opt_args[--permanent]} --get-ipsets)
;;
ipset-types)
_description ipset-types expl 'ipset type'
compadd "$expl[@]" - $(_call_program ipset-types $words[1] --get-ipset-types)
;;
ports)
if compset -P 1 '*/'; then
_description protocols expl 'protocol'
compadd "$expl[@]" - tcp udp sctp dccp
else
_message -e ports 'port number'
fi
;;
port-forwards)
_values -S = -s : 'port forward' \
'port[specify port]:port range:_sequence -n 2 -s - _ports' \
'proto[specify protocol]:protocol:(tcp udp sctp dccp)' \
'toport[specify port]:port range:_sequence -n 2 -s - _ports' \
'toaddr[specify destination address]:address[/mask]'
;;
services)
_description services expl 'service'
compadd "$expl[@]" - $(_call_program services $words[1] --get-services)
;;
tables)
_description services expl 'service'
compadd "$expl[@]" - security raw mangle nat filter
;;
zones)
_description zones expl 'zone'
compadd "$expl[@]" - $(_call_program zones $words[1] --get-zones)
;;
esac
# return whether matches were added
[[ nm -ne compstate[nmatches] ]] && return 0
return 1
PK 쥐\S�g�t4 t4 site-functions/_curlnu �[��� PK 쥐\D+~�� � �4 site-functions/_busctlnu �[��� PK 쥐\B�V�. . �@ site-functions/_coredumpctlnu �[��� PK 쥐\��m� � hG site-functions/_hostnamectlnu �[��� PK 쥐\:�i�W W �P site-functions/_journalctlnu �[��� PK 쥐\�t� 2h site-functions/_localectlnu �[��� PK 쥐\�\��� � |v site-functions/_loginctlnu �[��� PK 쥐\��t t ( p� site-functions/_sd_hosts_or_user_at_hostnu �[��� PK 쥐\��s?c c <� site-functions/_sd_machinesnu �[��� PK 쥐\ڿ�+! ! � site-functions/_sd_outputmodesnu �[��� PK 쥐\�5t� � Y� site-functions/_sd_unit_filesnu �[��� PK 쥐\� &J�< �< �� site-functions/_systemctlnu �[��� PK 쥐\�W4� � �� site-functions/_systemdnu �[��� PK 쥐\�v�� � *� site-functions/_systemd-analyzenu �[��� PK 쥐\�M��4 4 r� site-functions/_systemd-deltanu �[��� PK 쥐\K�g% % �� site-functions/_systemd-inhibitnu �[��� PK 쥐\ا� g� site-functions/_systemd-resolvenu �[��� PK 쥐\NJ8j@ @ � site-functions/_systemd-runnu �[��� PK 쥐\
#Ƽ� � [ site-functions/_systemd-tmpfilesnu �[��� PK 쥐\�Wt� � � site-functions/_timedatectlnu �[��� PK 쥐\�ZHM M � site-functions/_bootctlnu �[��� PK 쥐\�dU4� � d site-functions/_kernel-installnu �[��� PK 쥐\ �Em m = site-functions/_udevadmnu �[��� PK 쥐\��qluJ uJ �2 site-functions/_firewalldnu �[��� PK � �}